Powering On The Product - Seagate NAS Pro 4-Bay Manual

Opera on

Powering on the product

Caution: Do not operate the product until the ambient temperature is within the specified

operating range (see System Overview). Confirm that newly installed hard drives are acclimatized
. before operating them
Use the front power button to power on or power off the Seagate NAS Pro 2-Bay | 4-Bay | 6-Bay. You can also
shut down the device or place it into deep sleep using NAS OS. Follow the directions below if the device is
.connected to a power source and turned off or in deep sleep
Before powering on the product, make sure that all the modules are firmly seated in their bays. Note that all .1
drive slots must be filled by drives or empty disk trays in order for the product to receive sufficient
.cooling
.Confirm that the NAS Pro power supply is connected to a compatible power outlet .2
.Press the product's power button .3
48 4/28/15 Seagate NAS Pro 2-Bay | 4-Bay | 6-Bay