Nas Os Rescue - Seagate NAS Pro 4-Bay Manual

Hide thumbs Also See for NAS Pro 4-Bay:
Table of Contents

Advertisement

The NAS OS rescue tool is preconfigured on your Seagate NAS Pro. In addition to installing NAS OS, it can act as
a bootable rescue tool to help you troubleshoot technical problems. The NAS OS rescue includes three
Recover data: Enable FTP Access to the data on your NAS OS device. Once enabled, you can use FTP client
Restore to factory settings: Reset your NAS OS device to its factory default while attempting to preserve
the shares and data. Seagate cannot guarantee that all your data will be saved. Factory default includes the
.reversion of all NAS OS parameters (e.g. Users, General, Network, etc.) to their original states
Format the drives and install NAS OS: The Installer will format the NAS's hard drives before reinstalling NAS
OS. Since all data will be deleted during the format, Seagate highly recommends that you back up your files
The NAS OS rescue will attempt to repair or reset the NAS OS. To guarantee that data stored on the NAS is
preserved, Seagate highly recommends that you back up all shares before moving forward with the Installer. If
.you cannot access the NAS volumes, the rescue provides an option to retrieve data via FTP
Following the backup (if applicable), turn the NAS off. If you have access to NAS OS, use the power icon on the
.upper right of the window to select Shutdown. Otherwise, apply a short push to the power button
The NAS OS rescue tool is enabled upon booting the NAS by simultaneously pushing the Recovery and power
buttons. The recovery button is located on the back of the NAS within a small recessed niche. To push the
.recovery button, you will need a thin pointed object such as a paperclip or a small screwdriver
Once it is enabled, the NAS OS rescue prompts you for the NAS Pro's MAC address. Your NAS Pro has two
MAC addresses, one for each LAN port (see
65
.software or a web browser to back up the data stored on your NAS
System
Overview). Check the MAC address labels on the back of
.Confirm that users on the network are not accessing the NAS Pro .1
4/28/15

NAS OS Rescue

.before selecting this option
Prepare for a rescue
Back up the NAS Pro
Recovery bu on
MAC address
.your device and note one for the rescue
Perform a rescue
Seagate NAS Pro 2-Bay | 4-Bay | 6-Bay
:recovery options

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srps20Nas pro 2-bayNas pro 6-baySrps60Srps40

Table of Contents