Seagate NAS Pro 4-Bay Manual page 58

You can add the 2.5-inch hard drive or SSD to an empty hard drive tray or replace an existing disk. Make certain
.that the capacity of the 2.5-inch hard drive is equal to or greater than the disk you are replacing
Remove a hard drive tray from the Seagate NAS Pro. It can be empty or filled with a hard drive you want to .1
.replace
If applicable, remove the hard drive by unfastening the four pins and extracting it from the tray .2
( . The hard drive tray has an SSD adapter switch on the bottom right (Image A). Push it down (Image B .3
58 4/28/15 Seagate NAS Pro 2-Bay | 4-Bay | 6-Bay