DENT Instruments PowerScout 24 Operator's Manual page 71

Modbus Offset Register
46053 6052 Positive Apparent PF L1
46054 6053 Positive Apparent PF L2
46055 6054 Positive Apparent PF L3
46056 6055 Amps L1
46057 6056 Amps L2
46058 6057 Amps L3
46059 6058 Volts L1 to Neutral
46060 6059 Volts L2 to Neutral
46061 6060 Volts L3 to Neutral
46062 6061 Time Since Reset LSW (Seconds)
46063 6062 Time Since Reset MSW
(Seconds)
46080 6079 Positive kW System Average
46081 6080 kW Demand System Minimum
46082 6081 kVA Demand System Maximum
46083 6082 kVA Demand System Now
46084 6083 kVAR Demand System Max
DENT Instruments
PowerScout 24
All Things Modbus
Description
* System=sum of three phases
Individual Phase Positive Apparent Power Factors
(aPF); Register is 100x actual value (If the Individual
aPF(44053) is positive, this register will contain that
value else it will be zero)
"
"
Individual Phase Instantaneous Currents (A)
"
"
Individual Instantaneous Phase to Neutral Voltages
(V)
"
"
Seconds since kWh, kVAh, kVARh and associated
Demand registers were reset. LSW (resettable)
Seconds since CAM. MSW
Equals Positive KWH_SYSTEM_L&M ÷
(TimeSinceReset_L&M seconds /3600 seconds/Hr)
(resettable)
Min Average power window (kW)
Maximum Instantaneous kVA Demand (kW,
resettable).
System Average kVA Demand for the most recent
(current) Demand Window (resettable).
System Maximum kVAR Demand (kVAR, resettable). It
displays the default value after a CAM until 1 demand
window elapses. After a power cycle or CPU reset the
value is not reset but it does not update again until 1
demand window elapses.
71