Cisco Nexus 3000 Series Configuration Manual page 143

Configuring MAC Address Tables
Procedure
Step 1
This example shows how to trigger a Layer 2 consistency check and display the results:
switch# show consistency-checker l2
Consistency Check: FAILED
Legend:
since last
seen
Missing entries in the MAC Table
VLAN
---------+-----------------+--------+---------+------+----+------------------
1
1
Extra and Discrepant entries in the MAC Table
VLAN
---------+-----------------+--------+---------+------+----+------------------
* 1
OL-29545-03
Command or Action
switch# show consistency-checker l2
* - primary entry, G - Gateway MAC, (R) - Routed MAC
MAC Address Type
0100.0100.0106 dynamic
0200.0100.0125 static
MAC Address Type
0000.0100.0109 dynamic
Cisco Nexus 3000 Series NX-OS Layer 2 Switching Configuration Guide, Release 6.x
Triggering the Layer 2 Consistency Checker
Purpose
Starts a Layer 2 consistency check on MAC
addresses and displays the results.
age Secure NTFY Ports
- F F 0
- F F 0
age Secure NTFY Ports
370 F F Eth1/41
age - seconds
133