ABB RED615 Product Manual page 16

Line Differential Protection and Control
RED615
Product version: 1.1
Insulation and mechanical tests
Insulation tests
Dielectric tests:
• Test voltage
Impulse voltage test:
• Test voltage
Insulation resistance measurements
• Isolation resistance
Protective bonding resistance
• Resistance
Mechanical tests
Vibration tests (sinusoidal)
Shock and bump test
EMC compliance
Complies with the EMC directive 2004/108/EC
Standards
Product safety
Complies with the LV directive 2006/95/EC
Standards
RoHS compliance
Complies with the RoHS directive 2002/95/EC
Data communication for front interface
Front interface:
• TCP/IP protocol
• Standard CAT 5 Ethernet cable
• 10 MBits/s
1
1MRS756500 A
According to IEC 60255-5
2 kV, 50 Hz, 1 min
500 V, 50 Hz, 1min,
communication
According to IEC 60255-5
5 kV, unipolar impulses,
waveform 1.2/50 μs, source
energy 0.5 J
1 kV, unipolar impulses,
waveform 1.2/50 μs, source
energy 0.5 J, communication
According to IEC 60255-5
>100 MΩ, 500 V DC
According to IEC 60255-27
<0.1 Ω (60 s)
According to IEC 60255-21-1,
class 2
According to IEC 60255-21-2,
class 2
EN 50263 (2000),
EN 60255-26 (2007)
EN 60255-27 (2005),
EN 60255-6 (1994)
ABB