Equinox Systems EQ-TD-4286 Owner's Manual page 26

► Pairing with your mobile device
1. Under the one of the three conditions below, the Bluetooth indicator
will turn to flash which means that the Bluetooth of meter is turned on
automatically.
(a) Start with the meter switched off. Insert a test strip to turn on the
meter, the screen will display a flashing blood drop. Eject the test strip
and then the screen will display OFF. Then the Bluetooth indicator will
flash.
(b) After the completion of measuring mode, eject the test strip and then
the screen will display OFF. Then the Bluetooth indicator will flash.
(c) Press and release M to enter memory mode, the test strip icon and
will flash on the screen. Then the Bluetooth indicator will flash.
2. On your mobile device, turn on the Bluetooth function and follow the
instruction of your APP to pair the device (e.g., scan for the meter to add
it into app).
3. After successfully pairing the APP with the meter, the Bluetooth
function of meter shall be on before transmitting the data to your APP.
► Bluetooth indicator on the meter
BLUETOOTH INDICATOR
Flashing Blue
Solid Blue
NOTE
• While the meter is in transmission mode, it will be unable to perform a test.
• Make sure that your device supporting Bluetooth Smart Technology has turned
on Bluetooth before transmitting the data and the meter is within the receiving
range. For the requirement of OS version, please find on App Store or Google
Play when you download the app.
• A compatibility issue between your mobile device and the meter might occur
due to the way Bluetooth functionality is implemented by the various mobile
device manufacturers.
The Bluetooth function is enable and waiting
for connection.
The Bluetooth connection is established.
STATUS
25