Equinox Systems EQ-TD-4286 Owner's Manual page 13

3. Setting the time
With the hour flashing, press M until the
correct hour appears. Press SET.
With the minute flashing, press M until
the correct minute appears. Press SET.
4. Setting the unit of measurement
Press M to switch between mg/dL and
mmol/L. Press SET.
5. Deleting the memory
With "dEL" and a flashing " " on the
display, press M and select "no" to keep
the results in memory then press
SET to skip.
To delete all the results, press M and
select "Yes" and " " are displayed
on the meter, press SET to delete the
memory.
6. Setting the reminder alarm
You may set up any or all of the reminder
alarms (1-4). The meter displays "On" or
"OFF" and . Press M to turn on or
turn off to set the first reminder alarm.
12