Setting The Meter - Equinox Systems EQ-TD-4286 Owner's Manual

Setting the Meter

Before using your meter for the first time or if you change the meter
battery, you should check and update these settings. Make sure you
complete the steps below and have your desired settings saved.
SET
Entering the Setting Mode
Start with the meter off (no test strip
inserted). Press SET.
1. Setting the date
With the year flashing, press M until the
correct year appears. Press SET.
With the month flashing, press M until
the correct month appears. Press SET.
With the day flashing, press M until the
correct day appears. Press SET.
2. Setting the time format
Press and release M to select the desired
time format --- 12h or 24h. Press SET.
11