Help Guide | Recording With An External Microphone - Sony ICD-PX333F Help Manual

Help Guide
How to Use
Preparation
Recording
Playback
Editing
FM radio (ICD-PX333F only)
Menu
Computer
Software
Specifications
Announcements
Troubleshooting
List of Topics
IC Recorder
ICD-PX333/PX333F
Back Back to Top
Recording with an external microphone
When you connect a stereo microphone to the IC recorder and the recording mode
is set to "SHQ" or "HQ" mode, you can record sound in stereo. You can play back
the sound in stereo using stereo headphones.
1. Connect an external microphone (
the stop mode.
"Select Input" appears in the display window. If "Select Input" is not displayed,
set it in the menu.
2. Press – or + to select "MIC IN," and then press
3. Press (stop) to exit the menu mode.
4. Press REC/PAUSE to start recording.
The built-in microphone is automatically cut off.
If the input level is not strong enough, adjust the "Mic Sensitivity" setting on
the IC recorder.
When a plug in power type microphone is connected, power is automatically
supplied to the microphone from the IC recorder.
Note
After you have made the connection, check the sound quality of the
conversation and the recording level before you start recording.
If the beep of the telephone or a dial tone is recorded, the conversation may be
recorded with lower level of sound. In this case, start recording after the
conversation has started.
The VOR function may not work, depending on the kind of telephone or the line
condition.
We assume no responsibility whatsoever for any inconvenience, even if you
cannot record a conversation using the IC recorder.
Hint
To stop recording, press
You can use a headphone-type electret condenser microphone (not supplied) to
123
Search
) to the jack when the IC recorder is in
(stop).
Print
PLAY/STOP·ENTER.