Help Guide | Inserting Batteries - Sony ICD-PX333F Help Manual

Help Guide
How to Use
Preparation
Recording
Playback
Editing
FM radio (ICD-PX333F only)
Menu
Computer
Software
Specifications
Announcements
Troubleshooting
List of Topics
IC Recorder
ICD-PX333/PX333F
Back Back to Top
Inserting batteries
1. Insert batteries.
Slide and lift the battery compartment lid, insert LR03 (size AAA) alkaline
batteries with correct polarity, and close the lid.
Note
Do not use manganese batteries for this IC recorder.
When replacing the batteries, be sure to replace both batteries with new ones.
When you are not going to use the IC recorder for a long time, remove the
batteries to prevent damage from battery leakage and corrosion.
Hint
If the battery compartment lid is accidentally detached, attach it as illustrated.
The battery indicator in the display window shows the battery condition.
: "Low Battery Level" appears. Replace the old batteries with new ones.
: "Low Battery" appears and the IC recorder will stop operation.
When replacing the batteries, files recorded or alarm settings are not erased
even when you remove the batteries.
When replacing the batteries, the clock continues moving for about 1 minute
after you remove the batteries.
You can use two NH-AAA-B2KN/NH-AAA-B2EN rechargeable batteries (not
supplied).
90
Search
Print
Go to Page Top