Help Guide
How to Use
Preparation
Recording
Playback
Editing
FM radio (ICD-PX333F only)
Menu
Computer
Software
Specifications
Announcements
Troubleshooting
List of Topics
© 2013 Sony Corporation
IC Recorder
ICD-PX333/PX333F
Back
Back to Top
Adjusting the playback speed – the DPC (Digital Pitch
Control) function
You can adjust the playback speed in a range from 0.50 times to 2.00 times. The
file is played back in natural tones by means of a digital processing function.
1. In the stop or playback mode, select DISP/MENU - "DPC(Speed Control)," and
then press
PLAY/STOP·ENTER.
2. Press –
or
+ to select "ON," and then press
3. During playback, press –
The speed decreases by 0.05 times (from ×0.50 to ×1.00).
The speed increases by 0.10 times (from ×1.00 to ×2.00).
When you press and hold each button, you can change the speed continuously.
The playback speed is set to "×0.70" when you purchase the IC recorder.
Note
The noise cut function does not work if you set "DPC(Speed Control)" to "ON."
Hint
To resume normal playback speed, select "OFF" in step 2.
133
Search
PLAY/STOP·ENTER.
or
+ to adjust the playback speed.
Print
Go to Page Top