Chapter 2 Installing Bbu-Plus2; Installation Procedure; Putting Setup Date Label - NEC N8103-106 User Manual

Chapter 2 Installing BBU
This chapter describes the installation of the BBU in the server.

1. Installation Procedure

To install the BBU in the disk array controller, see the following procedure.
Before the installation, refer to the User's Guide of the disk array controller and
that of the server.
Check

1-1. Putting Setup Date Label

Fill the year and month when the BBU is installed in the disk array controller on the battery
label coming with the cover.
We suggest to fill in the accessory one and put it to the place that you notice easily such as
system case.