Chapter 2 Installing The Bbu; Installation Procedure; Checking The Cable - NEC BBU User Manual

16

Chapter 2 Installing the BBU

This chapter describes the installation of the BBU in the disk array controller.
The procedure described here is the installation of the BBU in the Internal
SAS HDD Disk Array Controller.
It is similar to the installation of the BBU in the External SAS HDD Disk
Array Controller.
Check

1. Installation Procedure

Install the BBU in the disk array controller as described in the following procedure.
Before starting the installation job, refer to the User Guides of the disk array
controller and of the server.
Check

1-1. Checking the Cable

Make sure that the cable is removed from both the battery cell and the memory module.
If the cable is connected, remove it.