JVC GR-D820EK Instructions Manual page 48

48
Troubleshooting
EN
Problem
The LCD monitor
indications blink.
The POWER/CHARGE
lamp on the camcorder
does not light during
charging.
The tape is moving, but
there is no picture.
Blocks of noise appear
during playback, or there
is no playback picture and
the screen becomes blue.
The colour of snapshot
looks strange.
The remote control
GR-D860
does not work.
Possible Cause
● Effects functions that
cannot be used together
are selected at the same
time.
● Charging is difficult in
places subject to
extremely high/low
temperatures.
● The battery pack is not
attached firmly.
● Your TV has AV input
terminals, but is not set to
its VIDEO mode.
● The cassette holder cover
is open.
● The light source or the
subject does not include
white. Or there are various
different light sources
behind the subject.
● "REMOTE" is set to "OFF".
● The remote control does
not point at the remote
sensor.
● The remote control
batteries are exhausted.
Remedy
HRe-read the sections covering Effects
( 42).
HTo protect the battery, it is
recommended to charge it in places
with a temperature of 10°C to 35°C
( 50).
HDetach the battery pack once again
and re-attach it firmly (
HSet the TV to the mode or channel
appropriate for video playback
( 43).
HClose the cassette holder cover
( 20).
HClean the video heads with an
optional cleaning cassette.
HFind a white subject and compose
your shot so that it also appears in the
frame ( 40).
HSet "REMOTE" to "ON" (
HPoint at the remote sensor (
HReplace the batteries with fresh ones
( 13).
18).
35).
13).