Backlight Display; Automatic Power Off; Manual Datalogging; Warranty - Extech Instruments RH350 User Manual

Backlight Display

in
Press the [M /AV ] and [MEM] buttons together to turn on the backlight. It will remain on
RST
for ten seconds.

Automatic Power OFF

With the meter off, press and hold down the [ON/OFF
1 second to enter auto power off settings. Press the [MEM] button to select non-sleep (n) or
2, 5, 10, 20, 40 and 60 minutes autosleep. Press [T2

Manual Datalogging

Manual datalogging allows the user to store and recall up to 99 readings with the press of a
button.
1. Press the [MEM] button to manually store a single reading into memory. The display
will flash 3 times and the memory location number will be displayed below the humidity
reading.
2. To view stored readings, press and hold the [REC
"RECALL" will blink next to the memory location number on the display.
3. Press the [MEM] button to manually increment through the stored readings.
4. Press [REC ] + [MEM] for more than 1 second to clear the memory.
HOLD
5. Press [REC ] for more than 1 second to return to normal operation.
HOLD
Note: In RECALL mode, pressing the [M
search the stored readings in memory and display the minimum, maximum and
average values of the stored readings.
Note: An infrared printer port is located on the side of the meter. This feature is used on more
advanced models and is not functional on this model.

Warranty

EXTECH INSTRUMENTS CORPORATION (A FLIR COMPANY) warrants this instrument to
be free of defects in parts and workmanship for one year from date of shipment (a six
month limited warranty applies to sensors and cables). If it should become necessary to
return the instrument for service during or beyond the warranty period, contact the
Customer Service Department at (781) 890-7440 ext. 210 for authorization or visit our
website www.extech.com for contact information. A Return Authorization (RA) number
must be issued before any product is returned to Extech. The sender is responsible for
shipping charges, freight, insurance and proper packaging to prevent damage in transit.
This warranty does not apply to defects resulting from action of the user such as misuse,
improper wiring, operation outside of specification, improper maintenance or repair, or
unauthorized modification. Extech specifically disclaims any implied warranties or
merchantability or fitness for a specific purpose and will not be liable for any direct, indirect,
incidental or consequential damages. Extech's total liability is limited to repair or
replacement of the product. The warranty set forth above is inclusive and no other
warranty, whether written or oral, is expressed or implied.
] + [REC ] buttons for more than
SET HOLD
] to confirm the selection.
▲
WB
] button for 2 seconds and
HOLD
in
/AV ] button for min/max/avg readings will auto
RST
RH350/355 V2.1 8/08
4
www.burntec.com