User Configuration Sets - Point Grey Gazelle GZL-CL-22C5M-C Technical Reference

Point Grey Gazelle Technical Reference
2.4.1

User Configuration Sets

The camera can save and restore settings and imaging parameters via on- board configuration sets, also known as
memory channels. This is useful for saving default power-up settings, such as gain, shutter, video format and frame rate,
and others that are different from the factory defaults.
Configuration set 0 stores the factory default settings. Two additional sets are provided for custom default settings.
The following property settings are saved in configuration sets:
Number of taps (see
Frame Rate)
Sensor Input Clock
Gain(analog and digital)
Exposure
Black Level
Trigger source (see
Trigger mode (see
Trigger Delay
Trigger activation phase (see
Strobe mode (see
User Configuration Sets
Name
User Set Save
User Set Load
User Set Current
Revised 10/31/2013
Copyright ©2011-2013 Point Grey Research Inc.
Table 2.1: User configuration set properties
Setting the Video Format and
speed
Triggering off the GPIO
Asynchronous Triggering)
Trigger Polarity)
Programmable Strobe Output)
Description
Saves the camera's current configuration to
one of the three available user-configuration
sets
Loads a configuration set
Gets the currently-loaded configuration set
Strobe delay (see Programmable Strobe
Strobe activation (see Programmable Strobe
Chunk Data and checksum embedding
Blemish Pixel Artifacts correction on/off
Test Pattern mode
Height and vertical offset of all ROIs
Width and horizontal offset of ROIs
Sensor Mode Pixel Binning
Image Flip/Mirror
memsave value
value is 1 or 2
memload value
value is 0 (default), 1, or 2
memcurr
2 Gazelle Installation
Output)
Output)
(see Specifying Regions of Interest)
(see Specifying Regions of Interest)
Write
20