Physical Description - Point Grey Gazelle GZL-CL-22C5M-C Technical Reference

Point Grey Gazelle Technical Reference
1.2

Physical Description

1. Lens holder (C-mount)
Attach any C-mount lens or other optical
equipment. See
2. Glass/IR filter system
See Dust Protection
3. M3 mounting holes
Configuration of M3 mounting holes is the
same on the top and bottom of the camera
case. See
Mounting
Revised 10/31/2013
Copyright ©2011-2013 Point Grey Research Inc.
Lens Mounting .
.
Mounting with the Case or
Bracket.
4. FULL Camera Link connector
The camera uses a standard 26-pin SDR connector. M2
screwholes are located on either side of the connector
for secure connection to the 26-pin locking Camera Link
cable. Use this connector for the full configuration (with
BASE connector). See Camera Link
5. General purpose I/O connector
The 8-pin GPIO connector is used for power, external
triggering, and strobe output. See .
6. BASE Camera Link connector
Use this connector for the base configuration. See
Camera Link Connectors.
7. Status LED
This light indicates the current state of the camera
operation. See Status Indicator
1 Gazelle Specifications
Connectors.
LED.
6