Installing Your Interface Card And Software - Point Grey Gazelle GZL-CL-22C5M-C Technical Reference

Point Grey Gazelle Technical Reference
2.2

Installing Your Interface Card and Software

1. Install your Interface Card
Open the Windows Device Manager. Ensure the card is properly installed under the manufacturer's name or, in some
cases, Multifunction Adaptors. An exclamation point (!) next to the card indicates the driver has not yet been installed.
2. Enable the driver for the card
If not already done so as part of the card installation, enable the driver for the card as per the manufacturer's
instructions.
3. Install the Camera Configuration File for your Frame Grabber
a. Login to the
b. Select your Gazelle from the drop-down lists and click the Search button.
c. Click on the Software search results to expand the list.
d. Click on Gazelle Camera Configuration Files to begin the download.
e. From the download location, extract the zip files to a directory location of your choice.
Revised 10/31/2013
Copyright ©2011-2013 Point Grey Research Inc.
Ensure the card is installed per the manufacturer's instructions.
Connect the internal IDE or SATA power connector on the card to the computer power
supply.
Point Grey downloads page.
2 Gazelle Installation
18