Cisco Nexus 5500 Series Configuration Manual page 98

Configuring the COM1 Port
SUMMARY STEPS
1. configure terminal
2. line com1
3. databits bits
4. flowcontrol hardware
5. parity {even | none | odd}
6. speed {300 | 1200 | 2400 | 4800 | 9600 | 38400 | 57600 | 115200}
7. stopbits {1 | 2}
8. exit
9. (Optional) show line com1
10. (Optional) copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 line com1
Example:
switch# line com1
switch(config-com1)#
Step 3 databits bits
Example:
switch(config-com1)# databits 7
Step 4 flowcontrol hardware
Example:
switch(config-com1)# flowcontrol hardware
Step 5
parity {even | none | odd}
Example:
switch(config-com1)# parity even
Step 6 speed {300 | 1200 | 2400 | 4800 | 9600 | 38400 | 57600 |
115200}
Example:
switch(config-com1)# speed 115200
Cisco Nexus 5500 Series NX-OS Fundamentals Configuration Guide, Release 7.x
82
Configuring Terminal Settings and Sessions
Purpose
Enters global configuration mode.
Enters COM1 configuration mode.
Configures the number of data bits per byte. The range
is from 5 to 8. The default is 8.
Enables flow control on the hardware. The default is
enabled.
Use the no flowcontrol hardware command to disable
flow control on the hardware.
Configures the parity. The default is none.
Configures the transmit and receive speed. The default
is 9600.
OL-30890-01