Manually Setting The Device Clock; Setting The Clock Manager - Cisco Nexus 5500 Series Configuration Manual

Basic Device Management

Manually Setting the Device Clock

You can set the clock manually if your device cannot access a remote time source.
Before You Begin
Configure the time zone.
SUMMARY STEPS
1. clock set time day month year
2. (Optional) show clock
DETAILED STEPS
Command or Action
Step 1 clock set time day month year
Example:
switch# clock set 15:00:00 30 May 2008
Fri May 30 15:14:00 PDT 2008
Step 2
show clock
Example:
switch(config)# show clock
Related Topics
Configuring the Time Zone, on page 98

Setting the Clock Manager

You can configure the clock manager to synchronize all the clocks of the components in the Cisco Nexus
chassis.
SUMMARY STEPS
1. clock protocol protocol vdc vdc-num
2. (Optional) show run clock_manager
OL-30890-01
Purpose
Configures the device clock.
The format for the time argument is hh:mm:ss.
The range for the day argument is from 1 to 31.
The values for the month argument are January, February, March,
April, May, June, July, August, September, October, November,
and December.
The range for the year argument is from 2000 to 2030.
(Optional)
Displays the current clock value.
Cisco Nexus 5500 Series NX-OS Fundamentals Configuration Guide, Release 7.x

Manually Setting the Device Clock

101