Table of Contents
Advertisement
set it up
let's get you up and moving
turn it on & off
The Power Switch is located on the top of the device.
turn on/off
slide and release left (toward
lock
slide right (toward
(lock screen and rear buttons, but device
stays on)
8
set it up
)
)
set it up
When you first turn on your device, you'll need to do a
couple things to set it up. You know, answer a few
questions. Get to know each other.
1
Review or change the Language.
2
Review or change the Time Zone, Distance Units, and Temperature
Units.
3
Optionally customize the buttons on the rear of the
device.
4
Read and accept the Safety Warning.
5
Read and accept the End User License Agreement.
6
Connect your Bluetooth® enabled mobile phone. (Or
see "connect it" on page 9 to connect later.)
7
Read the Traffic feature notice, if it appears.
8
Use your connected mobile phone to try MotoExtras.
9
Tap Yes for a tutorial or tap No to continue.
10
Tap Done to start using your device.
Note:
To change these settings later, see your
User's Guide.
Advertisement
Table of Contents
