Set It Up; Turn It On/Off Or Lock It - Motorola MOTONAV TN500 Series Quick Start Manual

set it up

let's get you up and moving

turn it on/off or lock it

The Power Switch is located on the top of the device.
turn on/off To turn the display on or off, slide and
release the button left (toward
lock To lock the screen and rear buttons, slide
the button right (toward
stays on if it was on when locked.
Acquiring Satellites
To receive a strong signal, make sure your device has an
unobstructed view of the sky. It may take a few minutes
for your device to locate satellites the first time you turn
the power on.
set it up
When you first turn on your device, your MOTONAV walks
you through these easy steps:
1
2
3
4
5
).
6
). The device
7
8
9
Select a language, then tap Next.
Set the regional settings (Time Zone, Distance Units, and
Temperature Units), then tap Next.
Choose the side for the Zoom and Volume buttons,
then tap Next. Or customize one of the buttons with
your favorite function, then tap Next.
Read and accept the Safety Warning, then tap Next.
Read the End User License Agreement, tap Agree, then
tap Next.
Tap Yes and follow the prompts to connect to connect
your Bluetooth® enabled mobile phone. Or tap Skip to
do it later. (To connect later, see "connect it" on
page 8.)
Tap Yes to see a tutorial or tap Skip to view it later.
Tip: To view the tutorial later, tap Settings > Help > Tutorial.
Tap Done to start using your device.
View trial licenses for MotoExtras services and Safety
Cameras.
set it up 7