Use More Of Your Universal Remote And Docking Cradle For Ipod; Adding A Device - Philips SJM3152 Manual

5 Use more of your universal
remote and docking cradle
for iPod™
To access the advanced features of your
universal remote and dock for iPod™, you must
use the Set-up menu.
To open the Set-up menu, press and hold the
and
MODE IPOD™ LAUNCH
for 3 seconds.
To exit the Set-up menu and go directly to your
iPod™ menu, press the
IPOD™ LAUNCH
again.
To switch to your last selected device, press the
key.
MODE

5.1 Adding a device

To be able to operate your devices with your
universal remote for iPod™, you first have to
add these devices to the remote control. You can
add up to 6 devices from the list of devices
below. Examples of available devices include ( but
are not limited to):
Please check the Remote menu for the complete
listing of device labels that can be added.
You cannot add a device twice. Once you have
added a device to your Universal remote for
iPod™, it disappears from the list. However, the
list of devices includes 'TV-2' or 'VCR-2' for use
when you want to program a second TV or
second VCR.
16
To add a device:
1.
D
If you have already added 6 devices on the
remote, besides your iPod™ docking cradle, you
will be asked to delete a device.
2.
keys simultaneously
3.
key
If no working code set is found:
find a correct code set. This means that
the remote will send out all codes available
in the database until a working code is
found. This can take up to 25 minutes.
remote device.
When you want to add another device, select
"Yes". Press
When you have added all your devices, select
"No". Press

Use more of your universal remote and docking cradle for iPod

Select the option "Add a Device" in the
Set-up menu by using the cursor keys
Press .
OK
Note
Select the device and brand you want to
add. Press . The remote will search for
OK
available codes for the brand.
Follow the on-screen instructions to test
the codes. When a working code set is
found, your device is correctly installed
When the device is correctly installed, the
following screen appears:
and repeat steps 2 and 3.
OK
to return to the Set-up menu.
OK