Using Srm7500 As A Universal Remote Control - Philips SRM7500 Instructions For Use Manual

SRM7500 - Instructions for Use

Using SRM7500 as a universal remote control

The music, started while using the remote as a music controller, will
continue to play even though you pressed
universal remote control.
Selecting a Device
To select a device, you have installed on your remote control, you
press
the SRM7500.
The hard keys on your SRM7500 then get the same function as the
corresponding keys on the original remote control of the selected
device.
Notes
You can add up to 6 AV-devices and your PC Media Center, if available,
to your SRM7500.
Refer to chapters 'Add a Device' and 'Delete a Device' on pages 16 and 17
for more information about adding and deleting devices on your
remote.
© 2007 - Philips Innovative Applications, Interleuvenlaan 74-76, 3001 Leuven (Belgium)
repeatedly until the device icon appears on the screen of
• Some specific keys that are available on the original remote will not be
available on SRM7500 or vice versa. Check your original remote for
the available functions.
• You can learn functions from the original remote. Refer to chapter
'Fix a Key' on page 17 for more information on how to learn codes.
• When you awaken the remote after a time out, the last selected device
before time out will be active.
to use SRM7500 as a
Press on your SRM7500 to
use your SRM7500 as a universal
remote control. The device icon of
your last selected device will
appear on the screen.
11
SRM7500 - Instructions for Use