Optional Upgrade - StandDesk PRO Assembly Manual

Place the feet on top of the stabilizing foot plates and align the
holes. Finger tighten four M6x12 anti-slip bolts in a diagonal
pattern for best fit. Once all bolts are aligned, fully screw them
H7
STEP 6
If you purchased the optional cable management tray, attach it
face down to the back middle slat using four M6x12 bolts and
washers.
H2
H3
STEP 7

OPTIONAL UPGRADE

4
MIDDLE
5
BACK
SLAT
FRONT
MIDDLE
SLAT