Configuring The Mediatrix 440X Gateway; Logging Into The Mediatrix 440X Gateway Web Interface - Linksys Mediatrix 440 series Configuration Manual

Configuring the Mediatrix 440x Gateway

This section describes how to configure the Mediatrix 440x gateway for use in an LVS network. It
includes the following topics:
•
•
•
•
•
•
•
•
This document describes manual configuration, although the Mediatrix 440x gateway series supports
Note
remote provisioning. For more information about that feature, contact Mediatrix.

Logging into the Mediatrix 440x Gateway Web Interface

To access the Mediatrix 440x gateway web interface, complete the following steps:
Note Note that the PC you are using should be able to access the LVS network.
Step 1 In the web browser address field, enter the Mediatrix 440x gateway IP address. In this example, the IP
address is 192.168.1.75.
The login screen appears. (See
Figure 2
In the User Name field, enter a user name. (See
Step 2
The default username is public. Leave the Password field empty unless this has been previously set.
Logging into the Mediatrix 440x Gateway Web Interface, page 3
Configuring the Network Address, page 4
Configuring the SIP Port, page 5
Restarting the Mediatrix 440x Gateway, page 6
Configuring Communication to the SIP Proxy Server, page 8
Configuring ISDN Connectivity, page 9
Configuring Call Routing, page 10
Configuring DTMF Transport, page 14
Login Screen
Figure 2.)
Figure 3.)
SPA9000/Mediatrix® 440x ISDN Gateway Configuration Guide
Configuring the Mediatrix 440x Gateway
3