Table of Contents
Advertisement
Configuring the SPA9000
Figure 20
Step 7
In the SIP tab, scroll to the PBX Parameters section and type the dial-out criteria for this line in the Call
Routing Rule field. (See
This example specifies that when the SIP endpoint connected to a SPA9000 dials a number, different
numbers cause the call to be routed as follows:
•
8—Routed through ISDN (Line 3–Mediatrix 440x gateway)
•
0—Routed to VoIP ITSP (Line 1)
•
9—Routed to the PSTN (Line 2–PSTN)
Figure 21
Again in the Line 3 tab, scroll to the Dial Plan section and update the dial plan of the Line in the Dial
Step 8
Plan field to remove the "8" before sending the number out. (See
Figure 22
Step 9
Submit the changes.
Now, when any SPA9000 SIP endpoint dials "8" as a prefix before the external number, SPA9000
automatically routes the call through the Mediatrix 440x gateway to ISDN.
Make sure that the dial plan of your phone allows you to dial "8" (or whatever the number defined) as a
Note
prefix to route the calls through the ISDN gateway.
SPA9000/Mediatrix® 440x ISDN Gateway Configuration Guide
16
Setting User ID
Figure
21.)
Setting the Call Routing Rule
Configuring the Dial Plan
Figure
22.)
Advertisement
Table of Contents
