Figure 11
In the Proxy Host field, enter the correct SPA9000 IP address and SIP port.
Step 2
Click Submit.
Step 3
Configuring ISDN Connectivity
After the ISDN line is connected to the BRI1 port (and the BRI2 port, if applicable), complete the
following steps to configure ISDN settings:
In the main configuration screen (see
Step 1
The Basic Rate Interface screen appears. (See
Servers Screen
Figure
4), click ISDN, and then click Basic Rate Interface.
Figure
12.)
SPA9000/Mediatrix® 440x ISDN Gateway Configuration Guide
Configuring the Mediatrix 440x Gateway
9