Table of Contents
Advertisement
To configure call routing, complete the following steps:
Step 1
In the main configuration screen (see
The Call Routing Config screen appears. (See
Figure 13
Call Routing Config Screen
Go to
Step 7
if configuring a Mediatrix 4401 gateway.
Note
Click the
icon at the bottom right of the Hunt section.
Step 2
The Configure Hunt End screen appears. (See
Figure
4), click Telephony, and then click Call Routing Config.
Figure
13).
Figure
14.)
SPA9000/Mediatrix® 440x ISDN Gateway Configuration Guide
Configuring the Mediatrix 440x Gateway
11
Advertisement
Table of Contents
