Restarting The Mediatrix 440X Gateway - Linksys Mediatrix 440 series Configuration Manual

Configuring the Mediatrix 440x Gateway
Figure 7
In the SIP Port field, type the SIP port number.
Step 2
This example uses the default, which is 5060.
Note Verify that the specified port is being used in the SPA9000 when you define the proxy address (see
Configuring the SPA9000, page
Step 3 Click Submit.

Restarting the Mediatrix 440x Gateway

You need to restart the affected services on the Mediatrix 440x gateway after configuration changes
occur. (See
SPA9000/Mediatrix® 440x ISDN Gateway Configuration Guide
6
Gateway Screen
15)
Figure 8.)