Camera Tampering - Axis Network Camera 221 User Manual

Axis communications network camera user's manual
Hide thumbs Also See for Network Camera AXIS 221:
Table of Contents

Advertisement

AXIS 221 - Event Configuration
30
Please see the online help
for descriptions of each available option.

Camera Tampering

The camera tampering application generates an alarm whenever the camera is
repositioned, or when the lens is covered, sprayed, or severely defocused.
You must also create an event, see How to set up a triggered event, on page 28, for the
camera to send an alarm.
Settings
Minimum duration - This parameter sets the minimum tampering period, i.e. an alarm
will not be triggered until this period has elapsed, even if the tampering conditions are
otherwise met. This can help prevent false alarms for known conditions that affect the
image.
Alarm for dark images - If the camera lens is sprayed or covered so that the camera live
view becomes dark, it will not be possible to distinguish this situation from other situations
where the same effect is seen, i.e., when lighting conditions change.
When this paramater is enabled, alarms will be generated for all cases where the lights are
either dimmed or turned off, or if the lens is sprayed, covered, or severely defocused. If not
enabled, no alarm will be sent.
After making these settings, click Save.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents