Axis 24607R1 Power Manual

Camera Housing
This document is an addendum to the Camera
Housing & Accessories Operating Instructions and
describes how to connect power to the AXIS 221
installed in the outdoor housing. Please read
through both instructions carefully before
proceeding with the installation.
Camera housing with AXIS 221 installed
Follow the instructions in the Camera Housing &
Accessories Operating Instructions to install the
Axis network camera.
Follow these instructions to connect power to the
camera:
Connect the supplied cable from the power connector
in the camera housing (1,3) to the connector on the
back of the camera (2,4).
2
4
4
2
No. Color Description
1
Black Power connector GND (-)
2
Black Camera GND (-)
3
Red Power connector DC Power (+)
4
Red Camera DC Power (+)
This description applies to the following articles:
Item
VT Power Supply OHEPS19
VT Verso Housing HPV42K1A000
AXIS 221 Network Camera
3
1
Important!
Make sure that the + and - wires are connected correctly. If not,
the camera may be damaged when power is applied.
Part no.
0217-011
0217-001
0221-0xx