Overview; Ink Discharge - Epson WF-2540 Service Manual

WF-2540 / WF-2530 / WF-2520 / WF-2510 / WF-2010 series

5.1 Overview

This chapter provides the refurbishing work of the printer and its purpose.

5.1.1 Ink Discharge

Purpose
To clean the ink path inside the Printhead to restore its condition identical to the factory default.
Jigs
Required jigs and cleaning liquid for cleaning the ink path is as follows.
Shipping Liquid (CR06, 18kg)
Shipping Liquid (CR06, 1kg)
I/P, DPIC009BSP, 110, PRINTING
Operation of the Adjustment Program for refurbishment when performing the ink discharge
Ink discharge can be done by selecting and running "Ink Discharge" from the Adjustment Program for
refurbishment with the jig set on the printer.
At this point, the factory default values except the adjustment-related setting values are written on the EEPROM
on the Main Board of the printer. This is performed in order to erase the personal information including the
network settings and the operating information of the printer before refurbishment, etc.
This default value restoration is automatically done when performing the ink discharge by the Adjustment
Program for refurbishment automatically.
For the details of how to set the jigs for refurbishment and how to use the Adjustment
Program (for refurbishment), see guide in the Adjustment Program (for refurbishment).
Approximately four minutes are necessary for completing the Ink Discharge.
Refurbishment
Name
Ink Supply Jig
CSIC Chip (Bk)
CSIC Chip (C)
CSIC Chip (M)
CSIC Chip (Y)
Category
Jig
Jig
Jig
Jig
Jig
Cleaning Liquid
Cleaning Liquid
Ink Pack
Overview
Revision B
EPSON Part Code
20MJ11206
2011900JP1
2011900JP2
2011900JP3
2011900JP4
6104714
6104713
1462531
Confidential
74