Bose Lifestyle SoundTouch 535 Operating Manual page 26

Care and Maintenance
Problem
Intermittent bass
(Lifestyle
®
SoundTouch 135
®
systems)
Sound is impaired
by a loud hum or
buzz, which may
be electrical in
nature
Radio does not
work
FM sound is
distorted
Picture is blurry
when viewing 3D
content
Sound is distorted • Ensure the audio input cable is connected and not damaged.
No sound from a
connected device
No TV picture, but
audio is heard
A connected
device not
responding
consistently to re-
mote commands
Intermittent audio
dropouts heard
on coaxial digital
audio inputs
26 - English
What to do
• Check that the status indicator on the Acoustimass
amber (see page 24).
• If the soundbar status indicator is blinking amber:
- Connect the Acoustimass module to AC (mains) power (the status
indicator glows amber).
- Press the Setup button on the control console. Select "Reconnect
Acoustimass". Follow the on-screen instructions.
- Move system away from potential interference, such as a wireless
router, cordless phone, television, microwave, etc.
Contact Bose customer service to determine if and how
®
other electrical devices in the room create unwanted signals, and to
obtain possible remedies.
• Connect antennas.
• Move AM antenna at least 20 inches (50 cm) from the control
console and Acoustimass module.
• Adjust antenna position.
• Ensure the AM antenna is upright.
• Move antennas farther from control console, TV or other electronic
equipment.
• Select another station.
• Adjust antenna position.
• Fully extend the FM antenna.
• Ensure your 3D glasses are powered on (if necessary).
• Change the 3D system option to a different setting.
• Ensure the soundbar is not blocking the IR sensor on the TV.
• Reduce the volume output level from any external devices con-
nected to the control console.
• (Lifestyle SoundTouch
®
from the system.
• Check the connections.
• Do not make coaxial or optical audio connections to the same input
on the control console.
• Power on the device.
• Refer to the owner's manual that came with the device.
• Ensure the TV video input selection is correct for the
video source.
• Ensure cables are securely connected.
Connect the included external IR emitter to the control console. For
guidance, press the Setup button on the control console. Select your
device's setup options and follow the on-screen instructions.
Contact Bose customer service to request a composite video cable for
the coaxial digital audio connection.
135 systems) Remove all protective films
®
module is solid
®