Editing Your Heat Pump - Mitsubishi Electric MAC-568 User Manual

8. EDITING YOUR HEAT
PUMP
Edit a Unit
The Edit Unit functions allow you to change specific unit
information; change the name of unit, select which rule set
you wish to apply to the unit, move the unit to a different
building (if multiple buildings are set up and applicable),
select the unit type and model, or even delete this unit from
your account.
The Edit Unit functions can be accessed in two ways:
1. From the sidebar menu: Whilst viewing the unit you wish
to edit, select 'Edit this Unit'.
2. From the unit operation screen: Select 'Edit' at the
bottom of the screen.
Unit or Room Name
Change the name of your heat pump.
Which Rule to Use
The Rules function allows you to select a pre-created rule set
to apply from the drop down menu. For more information on
creating rules please read Section 9.
Zone Control
(Only available when connected to a compatible Ducted
System employing the use of a PAC-ZC Zone Controller.)
The Zone Control function can be edited to select which
zones are displayed for operation. By default 8 zones are
displayed.
Move to Building
(Only available when controlling multiple units)
The Move Building function allows you to move your unit to
a different building/location. This could simply be moving the
unit to a different zone/area within a single building, or even
moving a system from one building to another.
Unit Type/Model Name
Here you can select what type and model of heat pump this
Wi-Fi Interface is connected to. This will help support extra
functions and features.
Technical Details
Both the MAC Address for the Wi-Fi Interface connected to
your selected heat pump and the Wi-Fi strength received by
this Wi-Fi Interface are listed in the bottom left hand corner. A
value around -30 indicates good Wi-Fi strength whereas
-90 indicates poor Wi-Fi strength.
Delete
The Delete function allows you to delete the unit from your
account. Please note that once the unit is deleted it is totally
removed from your account, so please make sure before you
delete the unit that you mean to delete and not Move or Edit
the unit.
13 13