The Wi-Fi Connection Set Up - Mitsubishi Electric MAC-568 User Manual

2. THE WI-FI
CONNECTION SET UP
Required Hardware to Connect to
Wi-Fi Heat Pump Control
Mitsubishi Electric Heat Pump/Air
Conditioning System
You will require a compatible Mitsubishi Electric system to
connect to the Wi-Fi Heat Pump Control service. A full list
of compatible models can be found in Section 14 of this
manual. Compatible systems will require an unused CN105
terminal located within the indoor unit to which a compatible
Mitsubishi Electric Wi-Fi Interface can be connected.
Broadband Package
Wireless Internet access will be needed at the location where
the Mitsubishi Electric Heat Pump system is to be installed.
Please also check that your broadband package does not
have data usage limits or additional costs based
on data. If it does, please check whether additional data
costs will be incurred and are acceptable before purchasing
a Wi-Fi Interface.
Router
MAC-568: A compatible WPA2-AES capable router with
2.4GHz band enabled is required to use the Wi-fi Heat Pump
Control service.
MAC-558/559: A compatible WPA2-AES capable router with
both WPS and 2.4GHz band enabled is required to use the
Wi-Fi Heat Pump Control service.
Please refer to the Frequently Asked Questions in Section 16
if your router does not support this level of functionality.
4 4
Mitsubishi Electric Wi-Fi Interface
You will need to purchase a Wi-Fi Interface to connect your
system to Wi-Fi Heat Pump Control. Please contact your
local Mitsubishi Electric agent, Sales Representative or
Distributor for more information on how to purchase this.
Please note, the Wi-Fi Interface is not designed for self-
installation. To prevent the risk of electric shock or personal
injury a professional installer must always be used to
complete the installation.
PC, Tablet or Smartphone
You will need a PC, tablet, smartphone or other internet
enabled device to be able to connect to Wi-Fi Heat Pump
Control. A list of compatible devices is shown in Section 14
of this manual, or please check with your installer.