Electrical Installation - AEG B890905 User Manual

Problem
The oven lamp does not oper-
ate.
It takes too long to finish the
dishes or they are cooked too
fast
Steam and condensation settle
on the food and in the oven
cavity
The display shows an error
message (for example "F....")
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
INSTALLATION
WARNING!
Refer to "Safety information" chapter.

Electrical installation

WARNING!
Only a qualified and competent person must do the electrical installation.
The manufacturer is not responsible if you do not follow safety precautions from chapter
"Safety information".
This appliance is supplied with a main plug and a main cable.
Possible cause
The oven cooking function is
not set.
Incorrect settings
Dishes have been left in the
oven for too long
Electronic fault
Installation
Solution
Touch to switch on the
oven and set the oven cooking
function.
Refer to the cooking function
sections and to any cooking
chart provided.
Do not leave the dishes stand-
ing in the oven for longer than
15-20 minutes after the cook-
ing process ends
Switch the appliance off and
on again through the fuse or
the safety switch in the fuse
box. If the display shows the
error message again, contact
the authorised Service Centre.
.........................................
.........................................
.........................................
27