Make sure you install the anti-tilt
protection at the correct height.
Set the correct height and area for
the appliance before you attach the
Install the anti-tilt protection 77 mm
down from the top surface of the ap-
pliance and 49 mm from the left side
of the appliance into the circular
hole on the bracket (see fig.). Screw
it into the solid material or use appli-
cable reinforcement (wall).
You can find the hole on the left side
at the back of the appliance (see
14. ENVIRONMENT CONCERNS
Recycle the materials with the
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
. Put the packaging in
Lift the front of the appliance (1) and
put it in the middle of the space be-
tween the cupboards (2). If the space
between the bench cupboards is
larger than the width of the appli-
ance, you must adjust the side meas-
urement to centre the appliance.
Make sure that the surface behind
the appliance is smooth.
13.5 Electrical installation
The manufacturer is not responsi-
ble if you do not follow the safety
precautions from the chapter
This appliance is supplied without a
main plug or a main cable.
Applicable cable types: H07 RN-F, H05
RN-F, H05 RRF, H05 VV-F, H05 V2V2-F
(T90), H05 BB-F.
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal