Clock Functions; Setting The Clock Functions - AEG B890905 User Manual

14

Clock functions

CLOCK FUNCTIONS
Clock functions
SYMBOL
• If you set a clock function, the symbol flashes for approximately 5 seconds. In these 5
seconds, touch
• If you set the time, the symbol continues to flash for approximately 5 seconds. After
these 5 seconds, the symbol comes on. The time starts to count down.
• If you do not set one of the clock functions MINUTE MINDER
, the display shows the duration of the oven function.
If you use the clock functions DURATION
heating elements when 90% of the time is completed. The appliance uses the residual heat
to continue the cooking process until the time is completed (3-20 minutes).

Setting the clock functions

1. Use
related symbol, for example MINUTE MINDER
2. Use
You can hear an acoustic signal for 2 minutes when the time is completed. The appli-
ance switches off.
"00.00" and the related function indicator flash.
3. Use any button to switch off the acoustic signal.
With MINUTE MINDER
With DURATION
With DURATION
then you can set the clock function.
After and
You can only change the TIME OF DAY if :
• none of the clock functions DURATION and END are set;
• no oven function is set.
FUNCTION
MINUTE MINDER
DURATION
END
TIME OF DAY
or to set the time.
again and again until the display shows the necessary clock function and the
or to set the necessary time.
the oven must be switched on to set the clock function.
and END
and END
used at the same time, the display shows PROGRAMMED .
To set a countdown (max. 99 minutes). This function has no
effect on the operation of the appliance.
To set how long the appliance has to be in operation.
To set the switch-off time for an oven function.
You can use DURATION and END at the same time, if the
appliance is to be switched on and off automatically later.
To set, change or control the time of day.
and END
the oven switches off automatically.
you must set the oven function and the temperature first,
DESCRIPTION
, DURATION
, the appliance switches off the
.
or END