Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
7160-0577
CF54 DOCKING STATION
This instruction sheet is for the CF54 docking station only. For instructions on
features, set-up, and operation of the CF54 computer, please refer to the manual
provided by Panasonic with the computer.
This docking station is designed to be used with a variety of Gamber-Johnson
mounting systems. Installation instructions for other Gamber-Johnson products
are provided with each individual product.
This instruction sheet is for the following products:
Item No. 7160-0577-00, (-P) & (-E) No RF (External Power Supply sold separately)
Item No. 7160-0577-02, (-P) & (-E) Dual RF (External Power Supply sold separately)
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2015 Gamber-Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Revision
Rev. C
Printing Spec: PS-001
Distributed By:
Form
INST-673
1 / 6
Advertisement
Related Manuals for Gamber Johnson CF54
Summary of Contents for Gamber Johnson CF54
-
Page 1: Installation Instructions
Rev. C CF54 DOCKING STATION Printing Spec: PS-001 This instruction sheet is for the CF54 docking station only. For instructions on features, set-up, and operation of the CF54 computer, please refer to the manual provided by Panasonic with the computer. - Page 2 PRE-INSTALLATION RECOMMENDATOINS Conduct a "Bench Test" Gamber-Johnson strongly advises a "bench test" be conducted to verify all electronic and software issues are resolved prior to installation: Make sure the computer is operational by itself. Insert computer into the docking station and verify that the computer is operating in the dock.
- Page 3 CF-54 DOCKING STATION FEATURE IDENTIFICATON Cable Tie Openings Dual RF Connector Rear Hooks Docking Connector Grounding Pins Front Hooks Lockable Latch 4X .25-20unc Studs 75mm VESA mounting pattern ANT 2 RF Switch ANT 1 15 Vdc Serial Power Video Ethernet HDMI USB 3.0 If using HDMI cable, snap ferrite...
- Page 4 CONNECTING VEHICLE POWER TO A CF-54 DOCKING STATION WITH AN EXTERNAL POWER SUPPLY Attach Power Supply with mounting bracket Motion Attachent attached with (4) .25-20unc nuts & washers Insert power plug into Connect to power port, secure cable 12Vdc Vehicle with cable ties power SCREEN SUPPORT ACCESSORY...
-
Page 5: Docking The Computer
DOCKING THE COMPUTER 1. Push the Latch Button to open the latch if the dock is in the closed position. 2. Insert the front of the CF-54 computer under the front hooks on the dock. Look at the handle to make sure the front of the computer is centered on the front hooks. - Page 6 Regulatory Certification Information Regulatory Model #: 7160-0577 GJ Model #'s & Description: 7160-0577-00 Dock - Panasonic - CF54 - No RF - VESA 75 7160-0577-00-P Dock - Panasonic - CF54 - No RF - VESA 75 7160-0577-00-E Dock - Panasonic - CF54 - No RF - VESA 75...