Table of Contents
Advertisement
Chapter 2
Basic Setup
This section provides information on how to assemble and configure the
RC8326 HD Camera for enrollment.
Installation
1. Assemble the Camera
Temporarily locate the camera close to the enrollment computer and
attach the Camera Stand to the camera.
2. Power Up
Connect the supplied 12V power adapter to the camera and power up.
Use only the power adapter provided. Using a different one may cause
hardware damage.
CAUTION: Use only the power adapter provided. Using a
different one can result in hardware damage.
The Power LED lights up solid green during startup, which takes about
one minute. After startup is completed, and prior to enrollment, the
Power LED blinks green.
RC8326 Wireless Indoor Day/Night HD Camera Installation Guide
Figure 4: Power Connection
2
7
Hide quick links:
Advertisement
Table of Contents
