ADT Pulse RC8326 Quick Installation Manual page 11

The following screen appears.
10. Press and hold the WPS/RESET button on the camera for 5 seconds to
establish a wireless connection.
Note: You must complete the WPS
connection within 2 minutes or else the
process will time out. The time remaining is
displayed in the upper left portion of the
screen.
The Network/WPS LED flashes amber as the
gateway attempts to connect to the camera.
The wireless connection is successful when
the Network/WPS LED turns solid green.
RC8326 Wireless Indoor Day/Night HD Camera Installation Guide
Chapter 3 ADT Pulse Enrollment
11