The Pulse enrollment is complete. The newly-added device appears in
the Cameras list.
12. At the top left of the screen, click Go Back.
13. You are returned to the Manage Devices screen. The total number of
installed cameras has increased by one. Click Close.
14. Click Close again to confirm.
15. Wait until the Power LED and Network LED are both lit solid green, and
then disconnect the camera from power.
16. Install the camera in its final location.
For Wall Mounting, refer to Chapter 4.
RC8326 Wireless Indoor Day/Night HD Camera Installation Guide
Chapter 3 ADT Pulse Enrollment
13