Installation - Patton electronics G.SHDSL NTU User Manual

2.3 Installation

Note: To avoid possible damage to this router, do not turn on the product before hardware installation.
Plug the power cord in the power socket.
Plug the console port in console if you want to configure the NTU with VT100 program of NB or PC.
Plug the E1 cable (Either 75Ω BNC cables or 120Ω cable) / SERIAL cable / Ethernet cable
Plug SHDSL cable
Power on
Model
E1 interface model
V.35 interface model
Ethernet interface model
Multi-interfaces model
Only the Multi-interfaces model can support all five type interfaces.
Interface modes support
E1 interface
V.35 interface
Ethernet interface
E1 interface
V.35 interface
Ethernet interface
E1+V.35 interface
E1+Ethernet interface
G.SHDSL NTU User Manual V0.03 16