Setting Up Arm Dstream-St; Installing The Usb Drivers For The Dstream-St Unit - ARM DSTREAM-ST Getting Started Manual

2.1

Installing the USB drivers for the DSTREAM-ST unit

To use the DSTREAM-ST unit with a USB connection, USB device drivers must be installed for your
operating system. The USB drivers for DSTREAM-ST are provided with ARM DS-5.
The drivers for DSTREAM-ST are optionally installed as part of the install process for DS-5. If you have
skipped the driver install process in DS-5, follow these steps to install them.
Procedure
• On Windows:
1. Using administrative privileges, run the
DS-5_install_directory\sw\driver_files
2. In the DS-5 Driver Installation Wizard, click Next and follow the steps.
During installation, you might receive warnings such as Windows can't verify the publisher of
this driver software. You can safely ignore these warnings and continue with the installation.
3. After the drivers are installed, click Finish.
• On Linux:
1. Using root privileges, run the
the DS-5 install directory. The
your workstation.
2. Enter
The USB drivers are now installed on your workstation.
ARM 100892_0100_00_en
Note
run_post_install_for_ARM_DS-5_vx.x.sh
x.x
to confirm the installation.
yes
Copyright © 2017 ARM Limited or its affiliates. All rights reserved.
2.1 Installing the USB drivers for the DSTREAM-ST unit
driver_install.bat
directory.
in the filename denotes the DS-5 version that is installed on
Non-Confidential
2 Setting up ARM DSTREAM-ST
®
batch file available in
script file available in
2-18