Dstream-St Unit Boot Sequence - ARM DSTREAM-ST Getting Started Manual

2.3

DSTREAM-ST unit boot sequence

Your DSTREAM-ST unit goes through a boot sequence when you power it up. Various LEDs identify
the progress of the boot sequence.
The DSTREAM-ST unit follows this boot sequence:
1. The DSTREAM logo illuminates blue.
2. The FLASH LED flashes as accesses take place.
3. The STATUS LED flashes green and then stays illuminated.
4. If the target is connected to the DSTREAM-ST unit and powered, the TARGET LED illuminates
green.
The DSTREAM-ST unit is now ready for use.
ARM 100892_0100_00_en Copyright © 2017 ARM Limited or its affiliates. All rights reserved.
Non-Confidential
2 Setting up ARM DSTREAM-ST
®
2.3 DSTREAM-ST unit boot sequence
2-20