GENERAL INSTRUCTIONS • WARNING: The cooktop is hot during use Carefully read the contents of this leaflet since and remains so for some time after being it provides important instructions regarding switched off. The risk of burns remains safety of installation, use and maintenance. until the residual heat indicators have gone Keep leaflet...
and their connection are completely flat. (the yellow/green ground conductor must Lock the domestic appliance into place with not be disconnected by a switch). When the 4 supporters, keeping in mind the width of appliance has been installed, the omnipolar the surface (Fig.2).
Page 6
TOUCH CONTROL (Fig.8) power for some minutes, and then to go back to a set power value. Select the desired cooking zone by pressing one of the B keys. Press the C key to increase the cooking zone power, up to value 9; by pressing the C key again, the symbol will be displayed.
Page 7
key on the cooking zone previously started, the B key related to this zone to confirm your then press the C and - keys simultaneously selection. (the E display will be activated), and bring the timer value back to 00 by using the D key •...
Need help?
Do you have a question about the CH-F3BR and is the answer not in the manual?
Questions and answers