DUDOFF G02-M1 Installation And User Instructions Manual

Built-in gas hob

Advertisement

Quick Links

INSTALLATION AND USER INSTRUCTIONS
BUILT-IN GAS HOB
G02-M1
Dear Customer,
we thank you and congratulate you on granting us your preference, by purchasing one of our
products. We are sure that this new appliance, manufactured with quality materials, will meet your
requirements in the best possible way.
The use of this new equipment is easy. However, we invite you to read this booklet carefully,
before installing and using the appliance.
This booklet gives the right information on the installation, use and maintenance, as well as useful
advice.
THE MANUFACTURER
COD. 208817-00 - 15.11.2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G02-M1 and is the answer not in the manual?

Questions and answers

Summary of Contents for DUDOFF G02-M1

  • Page 1 INSTALLATION AND USER INSTRUCTIONS BUILT-IN GAS HOB G02-M1 Dear Customer, we thank you and congratulate you on granting us your preference, by purchasing one of our products. We are sure that this new appliance, manufactured with quality materials, will meet your requirements in the best possible way.
  • Page 2: General Notice

    GENERAL NOTICE We invite you to read this instruction booklet carefully, before installing and using the equipment. It is very important that you keep this booklet together with the equipment for any future consultation. If this equipment should be sold or transferred to another person, make sure that the new user receives the booklet, so that he can learn how to operate the appliance and read the corresponding notice.
  • Page 3 DESCRIPTION AND DIMENSIONS 1 Rapid burner 3000 W 2 Semi-rapid burner 1750 W 3 Auxiliary burner 1000 W 4 Ultra-rapid burner 4000 W 5 Ultra-rapid burner 2 way 4000 W 6 Control Knob for burner...
  • Page 4: Instructions For The User

    INSTRUCTIONS FOR THE USER IT IS NECESSARY THAT ALL THE OPERATIONS REGARDING THE INSTALLATION, ADJUSTMENT AND ADAPTATION TO THE TYPE OF GAS AVAILABLE ARE CARRIED OUT BY QUALIFIED PERSONNEL, IN CONFORMITY WITH THE REGULATIONS IN FORCE. THE SPECIFIC INSTRUCTIONS ARE DESCRIBED IN THE BOOKLET SECTION INTENDED FOR THE INSTALLER The symbols silk-screen printed on the side of the between the maximum and the minimum ones,...
  • Page 5 INSTRUCTIONS FOR THE USER Notice - Do not use sprays near the appliance in - When the equipment is not working, always operation. check that the knobs are in the closing position - Do not place unstable or deformed pots on the (see fig.1).
  • Page 6: Instructions For The Installer

    INSTRUCTIONS FOR THE INSTALLER IMPORTANT NOTICE THE OPERATIONS INDICATED BELOW MUST BE FOLLOWED BY QUALIFIED PERSONNEL EXCLUSIVELY, IN CONFORMITY WITH THE REGULATIONS IN FORCE. THE MANUFACTURING FIRM REFUSES ALL RESPONSIBILITY FOR DAMAGES TO PEOPLE, ANIMALS OR THINGS, RESULTING FROM THE FAILURE TO COMPLY WITH SUCH PROVISIONS. Installing the top border to the adjacent walls (fig.4).
  • Page 7: Cutout Dimensions

    CUT OUT DIMENSIONS...
  • Page 8 INSTRUCTIONS FOR THE INSTALLER Fastening the top Electric connection Every cook-top is equipped with a special washer The appliances does not require to be connected having an adhesive side. to the mains power supply as it is provided with a - Remove the racks and burners from the top.
  • Page 9: Gas Transformations And Adjustments

    GAS TRANSFORMATIONS AND ADJUSTMENTS Adjusting the burners Replacing the nozzles The lowest flame point must always be properly If the equipment is adjusted for a type of gas that adjusted and the flame must remain on even if is different from the one available, it is necessary there is an abrupt shift from the maximum to the to replace the burner nozzles.
  • Page 10: Maintenance

    MAINTENANCE Replacing the battery (fig. 9) Unscrew the cap T . Replace the battery B type alkaline AA 1,5 V placing it in the spring M and making sure that the “ ” polarity faces upwards. Fit the battery into the battery holder and screw down the cap T.
  • Page 11 This product complies with EU Directive 2002/96/EC. The crossed-out dustbin symbol reported on the appliance indicates that the appliance must be disposed of separately from other domestic refuse at the end of its useful life. It must therefore be delivered to a waste recycling centre specifically for electric and electronic equipment or returned to the retailer at the moment of purchase of a new equivalent appliance.

Table of Contents