1. Manuals
  2. Brands
  3. Docomo Manuals
  4. Cell Phone
  5. Optimus L-04E
  6. Instruction manual

Docomo Optimus L-04E Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
L-04E
INSTRUCTION MANUAL
'13.XX

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Optimus L-04E and is the answer not in the manual?

Questions and answers

Related Manuals for Docomo Optimus L-04E

Summary of Contents for Docomo Optimus L-04E

  • Page 1 L-04E INSTRUCTION MANUAL ’13.XX...
  • Page 3 Handling the FeliCa Reader/ Writer ■ The FeliCa reader/writer function for this terminal handles delicate signals that require no radio station license. ■ The 13.56 MHz frequency band is used. If there is another reader/writer near this terminal, keep enough distance between this terminal and the reader/writer.
  • Page 4 Confirmation and Settings before Using Infrared port Part Names and Functions Bluetooth/Wi-Fi antenna area * Front camera GPS/Xi antenna Earpiece (receiver)/ area * Sub mouthpiece Main camera • Use the sub- Flash microphone when using the Back cover speaker phone. mark Proximity sensor * Speaker...
  • Page 5 There are three keys on the front of this Earphone terminal. The roles of these keys are shown microphone below. terminal Back key Power key/ Screen lock Tap this key to return to the previous screen. It also closes a dialog box, an options menu, 1Seg/mobacas the Notification panel, or the on- antenna...
  • Page 6 OFF the power and down disconnect the adapter. • This terminal uses only the miniUIM. Bring your UIM/FOMA card to a docomo Shop to exchange it. miniUIM security codes The miniUIM can set security code named PIN code.
  • Page 7 Removing the miniUIM microSD Card Remove the back cover (P35) A microSD card can be used with any other compatible devices. and the battery pack. Gently press • This terminal supports a microSD card of up the miniUIM with your fingertip and to 2 GB, a microSDHC card of up to 32 GB, slide it out and a microSDXC card of up to 64 GB (as of...

  • Page 8: Inserting A Microsd Card

    Inserting a microSD Card Removing a microSD Card Remove the back cover (P35) Remove the back cover, gently press the microUSB card with your Insert the microSD card into the slot fingertip, remove it to the arrow with the metal contacts facing down direction •...

  • Page 9: Battery Charging

    • Do not force the connector when inserting/ Charging pulling it out. Instead, insert/pull it out slowly. • If you start charging when the battery pack is empty, you may not be able to power ON this Battery Pack Life terminal for a while.

  • Page 10: Charging With The Desktop Holder

    Usage Time (estimate) Charging with the Desktop Holder A list of the charging time (estimate) of a fully charged battery is shown below. The usage This section describes how to charge the time varies depending on the usage conditions battery using the attached desktop holder L13 and the battery pack condition.
  • Page 11 Insert the microUSB connector of microUSB cable into the connection terminal on the back of desktop holder L13 • Insert the microUSB connector horizontally with the USB mark facing up. Insert the USB connector of the microUSB cable into the USB connection terminal of AC adapter Move this terminal in the direction while holding the desktop holder...

  • Page 12: Charging With The Ac Adapter

    After completing the battery charge, Charging with the AC Adapter hold the desktop holder L13 and How to use the optional AC adapter 03 * to remove this terminal in the direction charge this terminal is described below. as shown in the figure * AC adapter 03 consists of AC adapter and microUSB cable.
  • Page 13 Insert the USB connector of the ■ DC adapter 03(optional) The DC adapter supplies power to charge microUSB cable into the USB this terminal from a cigar lighter socket connection terminal of AC adapter (12V/24V) in a vehicle while the battery Insert the AC adapter plug into the pack is attached.

  • Page 14: Charging With A Pc

    Charging with a PC Turning ON/OFF the Power Connect this terminal to a PC with the Turning ON the Power MicroUSB Cable 01(optional) to charge. Insert the microUSB connector of Press and hold the power key for microUSB cable into the microUSB over 1 second connection terminal of this terminal •...
  • Page 15 Turning on Backlight Unlock the Screen Lock To prevent unintended operation and to save power, the backlight turns off after a set • In case "Lock screen" is set, unlock with period. If you then turn on the backlight to the method you have set beforehand.

  • Page 16: Using Touch Screen

    • Sticking a protective sheet or seal on the screen • Touching the screen when it is wet • Touching the screen with wet fingers • Operating while charging with an adapter other than designated adapter by docomo Confirmation and Settings before Using...
  • Page 17 Touch Screen Operations Checking or Unchecking Options You can perform the following actions on the Tap an item that has a checkbox touch screen. • If the checkbox was unmarked, a check • Tap : Touch the screen lightly mark now appears in it. •...

  • Page 18: Using Motion Gesture

    Zooming In or Out Using Motion Gesture Depending on the used application, you can Various functions can be operated simply by enlarge the screen and reduce the enlarged moving this terminal. screen. • To use motion gestures, tap u "Settings" u "Gestures"...
  • Page 19 Muting ringtone Note When an incoming call arrives, flip • From the Home screen, u "Settings" u "Gestures" u "Tilt sensitivity" and turn this terminal off the "Default sensitivity" checkbox to • The ringtone is muted. set the tilt sensitivity. •...

  • Page 20: Changing Screen Orientation

    Changing Screen Orientation Capturing Screen Shot This terminal screen automatically rotates to You can capture the display on screen and horizontal (landscape) or vertical (portrait) save it as an image. views, depending on the direction in which it is Hold down the power key and turned.
  • Page 21 ： Use another function while Note leaving a memo on the screen. • You can also launch QMemo by taping Tapping it again resumes "QMemo" on the notification panel. To editing of QMemo. display "QMemo" on the notification panel, ： Change the background. the quick settings must be customized.

  • Page 22: Character Entry

    ■ On-screen QWERTY keyboard Character Entry The array is the same as the PC's keyboard. This terminal has an on-screen keyboard that is displayed in the touch screen for character entry. Character Entry Using the Onscreen Keyboard If you tap a text box on the screen, the onscreen keyboard appears in the touch panel.
  • Page 23 Left cursor key/Arrow key Space key/" 変換 (convert)" key The cursor moves to the left. It can also Enter half space. " 変換 (convert)" is narrow the conversion range to convert. displayed during Hiragana input and a list of Touch and hold down this to change arrow conversion candidates is displayed.
  • Page 24 ■ On-screen 10-key keyboard (arrow key Cut key mode selected) Cut the selected characters. Paste key Paste the copied/cut text. Copy key Copy the selected text. Close Switch to the on-screen keyboard that has been displayed before the arrow key mode was displayed.
  • Page 25 ■ mazec-T Conversion keyboard Begin a new line etc. Note • The key display varies depending on the entry screen or character mode. • For information on switching the type of on-screen keyboard, refer to "Switching keyboard" (P53). • When you no longer need the keyboard, you can close it by tapping display it again, tap the text box on the Handwriting area...
  • Page 26 Flick input Switching keyboard Flick input makes it easier to input when using Touch and hold down on on- 10-key keyboard. screen keyboard Tap the key where the text to input • "LG Japanese Keyboard" menu is is allocated displayed. •...

  • Page 27: Changing Character Entry Settings

    Entering pictograms/symbols/ Changing character entry settings emoticons/pictogram-D Touch and hold down on a character entry screen to display "LG Japanese Keyboard" in a character entry screen to switch to menu. Tap "LG Japanese Keyboard Settings" pictogram/symbol/emoticon/pictogram-D input to change the character entry settings. mode, and display the available pictograms on the display.
  • Page 28 Auto Space Mark this checkbox to 10-KEY KEYBOARD Input automatically insert half- Flick Input Mark this checkbox to change width space after selecting the input method on the a character when inputting onscreen 10-key keyboard alphabet. to flick input. Unmark this Auto Double tap space key to checkbox to change it back to...
  • Page 29 CONVERSION DICTIONARY Input If you mark this checkbox, Japanese Tap this to display the Word the phrase confirmed by the User "Japanese User Dictionary" Learning conversion process is learned by Dictionary screen. Tap to register, edit iWnn IME. or delete words, or to delete the entire Japanese User Word Mark this checkbox to display...
  • Page 30 • Tap " 日本語 ( 日本 ) (Japanese (Japan))" to change language. a docomo apps password u "OK" u Check or uncheck "Mobile Network"/ input new docomo apps password u "Wi-Fi" on the "Set internet "OK"...
  • Page 31 "Location providing ON"/"Location Configuring Wi-Fi Settings providing OFF"/"Unknown blocking" This terminal connects to the Internet via on the "Location providing setting" access points for Wi-Fi networks or public screen u "Next" wireless LAN services. To connect, you must configure the access "Send"/"Not send"...
  • Page 32 Connecting to a Wi-Fi network Note From the Home screen, • Packet communication can be connected, even when Wi-Fi function is ON. However, "Settings" u "Wi-Fi" while Wi-Fi is available, Wi-Fi is prioritized. • The "Wi-Fi" screen appears. When the Wi-Fi network is disconnected, Turn "Wi-Fi"...
  • Page 33 Notifying when Wi-Fi network with no Note security protection is detected • Open network and protected network are two types networks that are available. From the Home screen, The network type is indicated by an "Settings" u "Wi-Fi" icon to the network name. represents •...
  • Page 34 Adding a Wi-Fi network Changing the Wi-Fi network password From the Home screen, From the Home screen, "Settings" u "Wi-Fi" "Settings" u "Wi-Fi" • The "Wi-Fi" screen appears. • The "Wi-Fi" screen appears. Turn "Wi-Fi" ON Touch and hold down the Wi-Fi network name "ADD NETWORK"...
  • Page 35 Ignoring unavailable radio waves Setting Wi-Fi connection while the screen is OFF This function enables re-connection with the available access point when the access point Disconnect Wi-Fi while the screen is OFF and is recognized as an unavailable one by Internet specify the timing of switching this terminal to due to no reply is received from your desired data communications.
  • Page 36 Adding an online service account Manually synchronizing online service data From the Home screen, From the Home screen, "Settings" u "Accounts & sync" "Settings" u "Accounts & sync" • The "Accounts & sync" screen appears. "ADD ACCOUNT" • The "Accounts & sync" screen appears. Tap the account that you want to •...
  • Page 37 Place a check mark on "Use LED • The selected account is deleted. light for notifications" Note Mark the functions for which you • docomo account cannot be added or want to enable the notification LED deleted. Note • The Area Mail notification setting cannot be changed.

  • Page 38: Status Bar

    Main status icons Screen Display/Icons Signal strength Status Bar Out of service area The status bar is displayed at the top of the screen. This terminal status and notifications Bluetooth Function ON (White) are displayed in the status bar. Notification icons are displayed on the left side, and this Connected to Bluetooth device terminal status icons are displayed on the right...
  • Page 39 Main notification icons Connected to Wi-Fi Communicating through Wi-Fi New Gmail Using Wi-Fi Direct New SMS message Battery level Problem with an SMS message The battery needs to be charged New Google Talk message The battery is empty Making a call or during a call The battery is charging Missed call Airplane mode activated...
  • Page 40 Free space on memory of this During Omakase Lock terminal is getting low Uploading data Note • appears when the terminal is charged Data Upload completed without the optional AC adapter (e.g. Downloading data when charged with a PC). • When is displayed, the battery charge Data download completed speed is slower than when the AC...

  • Page 41: Notification Panel

    Notification Panel Notification icons are displayed in the Notification panel. You can open notifications, such as messages, reminders, or event notifications, directly from the Notification panel. Opening the Notification panel Drag or swipe the status bar downwards • The Notification panel appears. Icons are displayed at the top of the Notification panel.
  • Page 42 Icon Switch GPS between on and off. Touch Drag to right and left to display the non and hold down to display the "Location displayed icon. services" screen. Switch Airplane mode between on and Adjust the brightness of screen in 4 off.
  • Page 43 Network operator/SIM operator Closing the Notification panel Upper is the currently connected network Drag or swipe the bottom of the operator's name. Lower is the operator's name read from the SIM card. Notification panel upwards Scroll bar Note Scroll to top to close the notification panel. •...

  • Page 44: Customizing Icons

    "Home" to use this feature. You • Selecting icon screen is displayed. cannot customize icon when using the "Create photo icon" u select from docomo Palette UI. "Take photo" and "Select from Gallery" Changing home application icon • Camera or gallery launches.
  • Page 45 Palette UI The docomo Palette UI is a home application that allows you to quickly find and operate what you want such as access to the Web and applications. Viewing the Home Screen You can customize the Home screen by adding or moving shortcuts or widgets, and by changing the wallpaper.
  • Page 46 • You can also drag the icon to one of the Home screen’s extended screens to the Group You can create a shortcut for left or right. group. Home Home screens are displayed. screens You can move or add screen. docomo Palette UI...

  • Page 47: The Home Screen

    • You can also change by touching and From the Home screen, touch and holding down the folder u tap "Edit name" hold down the application or widget on pop-up menu. you want to uninstall u "Uninstall" • The "Uninstall application" screen appears. docomo Palette UI...

  • Page 48: Changing Wallpaper

    "Gallery"/"Live wallpapers"/ "Kisekae" u select a design u "Set" "Wallpaper gallery (Home)"/ • It is possible to select and set designs "Wallpaper gallery (docomo that you like from a website. Wallpaper)" • If you have tapped "Gallery", select an image that you want to use as wallpaper, and set the trimming area to use by dragging it.
  • Page 49 Touch and hold down the Home screen Note • "select an action" menu appears. • You can also operate from the Home "Home screens" screen, u "Home screens" to add, • The "Home screens" screen appears. sort, and delete the Home screen. docomo Palette UI...

  • Page 50: Application List

    An application to activate dmarket. Not only can you purchase your favorite music, movies or books here, but also get introductions of applications on Google Play. (P162) ｉチャネル This is the application for (i-channel) using i-channel. docomo Palette UI...
  • Page 51 This allows you to send the Widget, and notifies information such as メール and receive emails using a incoming calls and email. (sp-mode docomo email address mail) (@docomo.ne.jp). It allows ドコモバック This is the application you to use pictograms and アップ...
  • Page 52 A software to view still and contents such as images (photos) and "NOTTV" are available. videos. (P191) (P169) Video Wiz You can easily create a Media This is the application music video. Player for playing music and videos. (P193) docomo Palette UI...
  • Page 53 IC tag and Keitai (P165) Reader barcode. iD アプリ This is the application for Calculator Four arithmetic operations (iD appli) setting e-money iD for are available. (P211) using. ToruCa Acquire, display, search and update ToruCa. (P168) docomo Palette UI...
  • Page 54 It allows you to chat Play You can rent and watch (text chatting) with Movies & movies via Play Movies, friends who have Google and also you can manage accounts. (P122) the shot videos personally. Internet Browse web page. (P118) docomo Palette UI...
  • Page 55 • The names of some applications may not message. It also enables be fully displayed below their respective you to send emails and icons. search for a route to your friend’s location. (P206) Google+ This social application is for sharing information with registered users. docomo Palette UI...
  • Page 56 It uses (Map Search, Navigation, the template and BGM application) Transfer and Visited that best fit the target places functions to scene and allows you to support you when you are easily post on SNS, etc. outdoors. docomo Palette UI...
  • Page 57 Touch and hold down the application using overseas Pake- hodai. icon you want to uninstall u "Uninstall" • "Uninstall application" screen is displayed. The confirmation screen appears, then tap "OK" u "OK" • The application is deleted. docomo Palette UI...

  • Page 58: Moving Applications

    From the Home screen, "Application" "Move" on a pop-up menu u select a Touch and hold down the group destination. name, and drag it • The group location is moved. docomo Palette UI...
  • Page 59 • The group shortcut icon is added to the "OK" Home screen. • The group name is changed. Deleting Groups Note • The names of groups "Recently"/"DOCOMO From the Home screen, "Application" Services"/"Download Application" cannot Touch and hold down the group be changed. name u "Delete"...
  • Page 60 Select the display for the Application screen From the Home screen, "Application" as Tile or List. u "Search" From the Home screen, "Application" • The Search widget starts. Enter a u "List format"/"Tile format" keyword or use Voice Input to search. docomo Palette UI...
  • Page 61 Palette UI. "Recommends" From the Home screen, u "Help" Tap an application to install • An explanation for the docomo palette UI • Follow the guidance on the screen and operation is displayed. install the application. Version Information of Home...
  • Page 62 Set whether to return to screens the initial screen when circularly* scrolling the Home screen. Home Backup or restore the backup & settings for applications/ restore* widget and theme. * You cannot change on docomo Palette UI. docomo Palette UI...
  • Page 63 Calling Making a Call From the Home screen, "Phone" u "Dial" • The "Dial" tab appears. Enter the phone number u • If you enter a wrong number, tap delete the number. Calling...

  • Page 64: Entering A Pause

    "Koe-Taku" button is made after adding wait, a message For details on the Koe-no-Takuhaibin, refer to asking whether to send the number the DOCOMO website. entered after ";" is displayed. "Phonebook" button Enter the menu number of the The phonebook is displayed. (P101) service that you are using u To end a call, tap "End"...

  • Page 65: Emergency Call

    Emergency call If you are not sending your caller ID by calling with "184" added or other means, your location information and phone Emergency call Phone number number are not notified. However, if the Police agency that received the emergency call considers your location information and Fire department or phone number necessary for important...

  • Page 66: Making An International Call

    WORLD CALL is an international call service mobile phone number, and that enables you to make a call in Japan via the DOCOMO terminals. Customers who have subscribed to the FOMA service would also have automatically subscribed to "WORLD CALL" at the same time.
  • Page 67 Receiving a Call Note • If the mobile phone number of the other When there is an incoming call, party or the area code begins with "0", • You can stop the ringtone and vibration remove the first "0". However, the first by pressing the volume keys (up and "0"...

  • Page 68: Adjusting Call Volume

    Name, phone number, and area Operations during a Call End call During a call, you can adjust the volume, turn Add call * the speaker ON/OFF, mute the microphone, Hold call * and put the call on hold, depending on the Duration of call usage conditions.
  • Page 69 Continuous incoming/outgoing call log with Call Log the same person If continuous incoming and outgoing calls You can display a log for incoming and with the same person exist, is displayed. outgoing calls. • The number in the parentheses indicates From the Home screen, tap "Phone"...
  • Page 70 Log icon Calling to Answer a Missed Call ：Dialed calls log ：Received calls log When you have missed calls, a missed call ：Missed calls log notification appears in the status bar. Phonebook If you see in the status bar, drag Tap to display phonebook.
  • Page 71 Registering Phone Numbers from Deleting the Call Log the Call Log to the Phonebook The call log is automatically added. However, you can delete a call log or all call logs. You can register unregistered items from the call log to the Phonebook. Deleting a desired call log On "Recent calls"...

  • Page 72: Setting Network Services

    Setting network services Call Settings/Other Set the docomo network services. Set each setting related to call. From the Home screen, "Phone" u From the Home screen, "Phone" u u "Call settings" u "Network service" u "Call settings" Koe-no- Use the service, confirm or...
  • Page 73 "Call forwarding service" ends automatically. into English. • This guidance is available also outside the service Remote Configure the remote area, or in no reception operation operation from docomo area. settings mobile phone, fixed line telephone or NTT pay phone Calling...

  • Page 74: Call Settings

    Using advanced call settings Phonebook Set details for call. In Phonebook, you can enter information about your From the Home screen, "Phone" u personal contacts, such as their phone numbers, email addresses and web service accounts. u "Call settings" u "Advanced call settings"...
  • Page 75 "Contacts" tab Display the list of contacts. List of contacts Tap the displayed icon after selecting an image to call, create mail or use services on the Internet etc. Groups Tap to select a group and display the contacts in groups. Register Register new contacts.

  • Page 76: Editing Contacts

    "My profile" tab (P107) Editing Contacts List of index You can edit a contact that has already been Tap to display "Index" on the lower right of registered. screen. On "Contacts" tab, tap a contact Index Display the initials of contacts. that you want to edit Search •...

  • Page 77: Deleting Contacts

    Making Calls/Sending Deleting Contacts Emails/Chatting via Contacts On "Contacts" tab, tap a contact You can make a call directly from Contacts. • The profile screen appears. If you have added an email address or chat u "Delete" u "OK" account to the Contacts entry, you can also •...

  • Page 78: Sharing Contacts

    On "Contacts" tab, tap a contact contact. • The profile screen appears. • You can only add docomo account to u "Share" Favorites. • A menu listing the applications that the On "Contacts" tab, tap a contact contact can be shared with appears.
  • Page 79 Changing Account of Editing / Deleting group information Phonebook to Display On "Contacts" tab, "Groups" u touch and hold down a group You can set display/non-display the phonebook that is included in specific account or group of "Edit group" / "Delete group" u "OK" Google account.
  • Page 80 Drag the contact to the registered creator application, and exchange the data via network. group and release your finger From the Home screen, "Phone" u Note "Phonebook" u "My profile" tab • Group function is only available for contacts created on docomo/Google account. Calling...
  • Page 81 • When the miniUIM is inserted, phone number of miniUIM is displayed automatically. Name card image • Image of name card created by "Name card creator" application is displayed. • You can save up to 10 name cards in My profile.
  • Page 82 Note • How to start/stop using the SNS connecting functions: - Start: Tap "Set" of SNS and Blog on the My profile edit screen to start settings for SNS. - Stop: On "My profile" tab, select "General settings" u "Stop Linking to SNS"...

  • Page 83: Sending An Sms Message

    70 double-byte characters (or This allows you to send and receive emails 160 single-byte alphanumeric characters) to using an i-mode mail address (@docomo.ne.jp). phone number as address. It allows you to use pictograms and Deco-mail, and also supports auto receive.
  • Page 84 "Mobile Phone User's Guide message, delete a message, display a [International Services]" or the DOCOMO thread, or select a quick message. "International Services website". • To send SMS messages to users of overseas network operators, enter "+"...
  • Page 85 "Manual" or "Next" Email • Follow the instruction on the screen. Using email is available by setting an account • Select account type when you tap of mopera U or general provider. "Manual". Follow the instructions shown on the screen to make the settings. For Setting Mail Account information about the settings, contact your service provider.

  • Page 86: Opening Email

    Opening Email Displaying a Received Email From the Home screen, "Application" Tap an email on the "Inbox" screen u "Email" • The email is displayed. • The "Inbox" screen is displayed. Note • New message is automatically checked and received. •...

  • Page 87: Creating And Sending An Email

    Creating and Sending an Adding an Account Email You can add multiple accounts on "Email" application. on the "Inbox" screen From the "Inbox" screen, • The "Compose" screen is displayed. "Accounts" Input recipient's address in "To" box • The "Email" screen is displayed. Input subject in the "Subject"...

  • Page 88: Account Settings

    Changing the Setting of Email Account Entire Set default account, settings notification of receiving From the "Inbox" screen, new message, Notification sound/vibrator when "Account settings" receiving emails etc. • The account setting screen is displayed. Change login Set receiving/sending Change settings as necessary settings server.
  • Page 89 Creating and Sending a Gmail Gmail Gmail is online email service of Google. You From the "Inbox" screen, can send and receive emails by using Gmail in • The "Compose" screen appears. this terminal. Enter email address in the "To" box Opening Gmail Enter a subject in the "Subject"...
  • Page 90 Receiving Early Warning Early Warning "Area Mail" "Area Mail" You can receive Earthquake Early Warnings etc. provided by the Japan Meteorological When an Area Mail is received, notification Agency. sound or ringtone sound and the text of the • Area Mail is a free service that does not Area Mail is displayed in a pop-up.
  • Page 91 Setting Early Warning "Area Mail" Browser From the Home screen, "Application" Browser allows you to view web pages in the same way that you can from a PC. u "Area Mail" • The "Early warning 'Area Mail' Inbox" screen appears. u "Settings"...
  • Page 92 Search box Opening Browser Tap to display the search box. Enter the text you want to search or URL to display a list of From the Home screen, "Internet" web page candidates and search candidates • The home page appears. that match the entered characters.
  • Page 93 * In case the icon is not displayed, drag the Searching for a web page by voice lower part of the browser screen up to display. entry Note Tap the search box • Displaying a web page that has been created for PCs, you can zoom in or •...

  • Page 94: Changing Browser Settings

    Using Bookmark and History Changing Browser Settings Bookmarking a web page allows you to quickly From the Browser screen, access that web page. "Settings" You can also view previously visited web Change the settings if required pages by displaying your browsing history. Adding a bookmark General Configure the home page and...
  • Page 95 Google Chrome Google Talk With Google Chrome, you can view Web pages, Google Talk is a Google instant messaging and synchronize tabs open in Chrome on your service. It allows you to chat (text chatting) PC, bookmarks, address bar data between the with friends who have Google accounts.

  • Page 96: Starting Chat

    Starting Chat Tap a friend's account on the "Talk" screen • The Chat screen appears. Tap the "Type message" box u Enter your message and • The text that you entered in the "Type message" box is sent. Mail / Web Browser...
  • Page 97 Settings Settings Menu WIRELESS & NETWORKS u "Settings" on the Home screen on Set whether to enable/disable networks and this terminal to display the "Settings" screen configure the network connection settings. that allows you to configure various settings. Wi-Fi Turn the Wi-Fi function ON/OFF. Configure the settings to use the Wi-Fi function.
  • Page 98 More... Note Airplane ON/OFF this terminal's • If you tap "Search networks" while using mode emission of radio waves. data communication over a LTE network, the message, "Please disable data File Set whether to share a folder in access and retry later." appears. networking this terminal with another device •...
  • Page 99 Wi-Fi Tethering Settings Note • You can enable internet access via the Connect wireless LAN compatible device up to mobile network by setting "Mobile Data" eight devices to the Internet simultaneously to ON. using this terminal as a Wi-Fi hotspot. •...

  • Page 100: Connecting To Vpn

    Setting Wi-Fi access point Connecting to VPN (Virtual Private Network) From the Home screen, "Settings" u "More..." u "Tethering" VPN (Virtual Private Network) is a technique to access to the information protected in local "Wi-Fi tethering" u "OK" network from other networks. VPN is generally "Configure Wi-Fi hotspot"...
  • Page 101 Connecting to a VPN Setting the Access Point In VPN list, tap a VPN name to The access points (sp-mode, mopera U) required for connecting to the Internet are connect preset. You can not delete or change them. But Enter the necessary authentication you may add or edit them if necessary.
  • Page 102 Enter any other items requested by your network operator sp-mode u "Save" sp-mode is an ISP for NTT DOCOMO smartphones. In addition to Internet Note connection, this also provides an email service • Do not change MCC to anything other...
  • Page 103 U DEVICE mopera U is an NTT DOCOMO ISP. If you have subscribed to mopera U, you can use Sound the Internet after making the simple settings. This allows you to configure various sound mopera U is a paid service that requires subscription.
  • Page 104 Display Wise Set whether to automatically ringtone play the ringtone at a larger This allows you to configure display settings, volume when you are in a noisy such as screen brightness and animation. place. Brightness Set the screen brightness. Quiet time Set the time to turn off all the sound except alarm and media.
  • Page 105 Wallpaper, Portrait view only, Scroll restore theme. screens circularly, and Home backup & restore are configured. • You cannot change the items other than "Wallpaper" on docomo Palette UI. Select Switch home applications. Home Choose docomo Palette UI or Home.

  • Page 106: Lock Screen

    Lock Screen Select Enter a numeric PIN to screen unlock screen. Follow the This allows you to configure whether to use lock instruction shown on the lock screen and the necessary settings. screen to enter a 4 to • The display or setting items vary depending 16-digit number.
  • Page 107 "Forgot pattern?" on the selected. reentry screen then log in with your • Not available on the docomo Google account that has been set on Palette UI. your terminal. In this way, you can enter a new pattern.

  • Page 108: Power Saver

    Storage Power saver Display free space in internal storage and free This allows you to set to reduce the function space of the microSD card, operate mount and usage when the battery power gets low. The format. "Power saver" provides functions different from the "eco モード...
  • Page 109 Apps Screen Set the lighting time of timeout backlight. Configure the settings for applications. Font key Turn ON/OFF the key light on Downloaded List/delete installed applications. light the front panel and set the lighting duration. Running List/stop the active services. BATTERY INFORMATION List/delete all the applications.

  • Page 110: Quad Core Control

    Enable again the application Quad core control When an application is disabled, the linked You can optimize the CPU control and set applications may not run properly. In such whether to restrict battery consumption. case, make it enable again to run properly. To Eco mode It is possible to save battery make an application enable again,...

  • Page 111: Docomo Service

    PERSONAL docomo Configure to use docomo Wi- Wi-Fi Easy Fi or Wi-Fi at home easy and docomo service, Accounts & sync, Location Connection convenient. services, Security, Language & input, Backup Send Configure to send the & reset etc. are configured.

  • Page 112: Location Services

    Accounts & sync Security This allows you to configure the settings of Configure the settings for password etc. accounts and their synchronization. SIM CARD LOCK Add or delete an account used in this Set up SIM Set whether to lock the SIM terminal, such as Google account.
  • Page 113 • If you forget your security codes, you need to bring your identification document (driver's license, etc.), this terminal and the miniUIM to a docomo Shop. For details, contact "General Inquiries" provided on the last page of this manual.

  • Page 114: Network Security Code

    Note Services or identification at reception of • If you use a miniUIM that has been your request in docomo Shop or at docomo currently used when you buy a new Information Center. It can be set to any terminal, use the same PIN code that had number at the subscription and also changed been set on the current terminal.
  • Page 115 • If you enter the PIN unblocking key incorrectly ten times in a row, the miniUIM will be locked. "Change SIM PIN" If this happens, please contact a docomo • You are asked to enter the PIN code. Shop. Enter the current PIN code, and tap Enabling miniUIM's PIN code "OK"...
  • Page 116 Enter PIN code Language & input This the following operations if you are asked This allows you to configure this terminal's to enter the PIN code when this terminal is language and keyboard settings. You can also powered on. configure settings for voice input and output. Enter the PIN code of the miniUIM, Language Select the language used on...
  • Page 117 Backup & reset Tap and place a check mark Keyboard to use. You can set various Operate initialization. settings. mazec-T Tap and place a check mark BACKUP & RESTORE Conversion to use. You can set various Back up my Configure whether to backup settings.
  • Page 118 Initializing Terminal SYSTEM From the Home screen, Date & time, Accessibility, Connectivity, "Settings" u "Backup & reset" Developer options, About phone are configured. "Factory data reset" u "Reset Date & Time phone" u "Erase everything" u "OK" This allows you to configure the date and time Note settings.
  • Page 119 Accessibility Note • "Need a screen reader?" appears when Set the settings of accessibility application. purchased. SERVICES Enable or disable the applications compatible with accessibilities. If you want to set accessibility, download compatible applications from Google Play in advance. SYSTEM Large text Display large text on the screen.
  • Page 120 PC connection Activating USB Tethering You can connect this terminal to a PC using the Configure the settings for USB connection microUSB connection cable (optional) to connect mode. to the Internet using this terminal as a modem. Connect this terminal and a PC USB CONNECTION using USB connection cable The default USB connection...

  • Page 121: Developer Options

    Developer options Software Display the Android version, information baseband version, kernel Configure the settings for developing version, build number and applications. software version of this terminal. About phone Legal Display information about the information terms of use. This allows you to display various informations of this terminal.
  • Page 122 File Management • Sharing some data may not be permitted due File Operation to copyright. You can synchronize music with "Windows Note Media Player" on your PC by connecting this terminal with the PC via the optional microUSB • Operating environment of a PC for file cable (optional), and transfer the data between operation is as follows: - O S * ：W i n d o w s 7/ W i n d o w s V i s t a /...
  • Page 123 Folder Structure in this terminal Note • Shot photos and videos are saved in When you connect this terminal with PC, the "DCIM" folder in the internal storage internal storage in this terminal and the in this terminal and the microSD card. microSD card are recognized with the name Music data synchronized with Windows "L-04E".

  • Page 124: Windows Media Player

    Synchronizing Data with Folder and File Operations Windows Media Player Transferring Data with a PC This allows you to synchronize music and videos with Windows Media Player library Connect this terminal with a PC on PC. In this way, music and videos with copyright protection can be synchronized as via the microUSB cable (optional) well as the copyright information.
  • Page 125 Disconnecting this terminal from a PC Infrared Communication Shut down safely or remove the This allows you to send and receive data with hardware on PC other terminals and mobile phones etc. that have infrared communication function. • Operate "Safety Remove Hardware" on •...

  • Page 126: Infrared Communication

    Sending My profile via Infrared Communication From the Home screen, "Phone" u "Phonebook" u "My profile" u "Send via infrared" Make the recipient to waiting state "OK" u "OK" Sending a Single Data (e.g. sending a contact) From the Home screen, "Phone" u "Phonebook"...
  • Page 127 "Send all" u "Phonebook" u "Start" u Bluetooth Communication enter docomo apps password u "OK" Connect this terminal to Bluetooth devices Enter authentication password u wirelessly, and enable to exchange data. "OK" u make the recipient to waiting • For Bluetooth compatible version or profile, state u "OK"...
  • Page 128 liable to be adversely affected by a microwave ■ Reception interference caused by wireless oven, so keep it 3 m or more away from the LAN devices microwave oven while using it. Otherwise, • As this terminal's Bluetooth device and normal connection cannot be performed when wireless LAN devices use the same nearby electric devices are powered on.
  • Page 129 Turning ON Bluetooth Function to Pairing/Connecting with Other Make this terminal Discoverable Bluetooth Device To transfer data by Bluetooth connection, From the Home screen, perform pairing (pairing setting) with the "Settings" u "Bluetooth" device in advance and register it to this Turn "Bluetooth"...
  • Page 130 When the other device requests for Note pairing • Even for device requiring pass code When a screen asking for pairing for Bluetooth (PIN) when pairing, once pairing is connection appears, tap "Pair" or enter pass performed, entering pass code (PIN) code (PIN) if required and tap "OK".
  • Page 131 Receive the data by following the Sending/Receiving Data via instruction on the screen of the Bluetooth Function recipient • Set the Bluetooth function to ON beforehand to be discoverable. Receiving data via Bluetooth Sending data via Bluetooth Set this terminal to discoverable You can send data of Phonebook (name card Tap "Accept"...
  • Page 132 Connect the microUSB connector External Device Connection of microUSB Cable (optional) to the microUSB connection terminal of Connecting this terminal with this terminal a PC • Insert the microUSB connector horizontally with the surface with the USB Connecting this terminal with a PC Make sure mark facing up.
  • Page 133 Connect the USB connector of • The following operations are available from the "USB connection type" screen. microUSB cable to the USB port of Charge Select this to charge only. only (P41) • This terminal is recognized automatically by PC. Media Select this to synchronize •...
  • Page 134 "Charge only" / "Media sync (MTP)" / "USB tethering" / "LG software" / "Camera (PTP)" Note • While connecting to a PC, drag or swipe the status bar down to open the Notification panel, and then tap "USB connection" to display the "USB connection type"...
  • Page 135 Application dmenu dmarket This allows you to access easily to docomo's This allows you to get convenient and fun recommended sites or convenient applications. contents. From the Home screen, "dmenu" From the Home screen, "dmarket" The browser launches, and "dmenu" is •...
  • Page 136 • If the application needs to access data Play Store and functions on this terminal, the functions used by the application are Google Play enables you to access applications displayed. and games you like and download them to "Accept & download" (for free install into this terminal.

  • Page 137: Purchasing An Application

    • After purchasing application, you can • NTT DOCOMO is not liable for any request a refund within a specified time. disadvantage brought to you or any third The application is deleted, and it will not be party due to an application you installed.
  • Page 138 Uninstalling an Application Osaifu-Keitai From the Google Play screen, Osaifu-Keitai is equipped with an IC card, so holding this terminal over a reader at a shop, it u "My Apps" u Tap the application is possible to make payments or use coupons that you want to uninstall or participate in stamp rallies.
  • Page 139 Keitai IC card to a new Osaifu-Keitai when Configure service settings you change a new model or when malfunction occurs. Contact your local docomo Shop to get • Make necessary settings from the iC transfer service. service site or application.
  • Page 140 Holding the Terminal over a Locking Osaifu-Keitai Reader Lock the Osaifu-Keitai service from being used. After locking, data cannot be acquired from the You can hold the up to a reader to enable reader. an electronic transaction. From the Home screen, "Application" u "Osaifu-Keitai"...
  • Page 141 Canceling the lock ToruCa From the Home screen, "Application" ToruCa is an electronic card that can be loaded u "Osaifu-Keitai" to your mobile. It can be acquired from readers and websites as the shop information or • The Osaifu-Keitai screen in the locked coupons.
  • Page 142 mobacas • It is not possible to acquire ToruCa from readers while Osaifu-Keitai is locked. mobacas is a broadcast service for • You cannot obtain the same ToruCa smartphones. "Realtime" (realtime when you set "ON" for redundant check. broadcasting) allowing you to view programs Set "OFF"...
  • Page 143 ■ Broadcast signal areas Viewing via mobacas mobacas is a broadcasting service that operates on radio waves (airwaves) different Viewing programs/content from those for FOMA services and 1Seg. Therefore, you cannot receive mobacas From the Home screen, "Application" service in locations that airwaves cannot u "NOTTV"...
  • Page 144 Viewing the viewing screen Note • You cannot use mobacas when mock locations setting is enabled. You can disable the setting by following procedure. From the Home screen, u "Settings" u "Developer options" u confirm the content of the Warning screen and "OK" u remove a check mark in "Arrow mock locations".
  • Page 145 Searching for programs/ content Search for programs/content in a variety of ways from within the application. Searching from a program listing (Realtime) From the NOTTV home screen, " 番組表 (Program Listing)" Image • A Realtime program listing is displayed. • Swipe it to the right/left to switch •...
  • Page 146 Content Scheduling Note • During the broadcasting time of contents, From the NOTTV home screen, the contents may not be received in " すべて (All)" situations such as, when the device is turned off, when it has low battery, when "...
  • Page 147 mobacas settings 番組・コンテンツ Set time to obtain 情報取得 program/content listing From the NOTTV home screen, (Program & information via broadcast. Content Info u " 設定 (Settings)" Retrieve) Change the settings if required 自動コンテンツ Set data to be 表示・音声 (Display & Audio) 補完...
  • Page 148 1Seg ペアレンタル Set a restriction on コントロール programs/content geared 1Seg is a digital terrestrial TV broadcasting (Parental to certain ages. service for mobile devices that allows you to Control) receive data programs along with video and ブラウザ (Browser) audio. It is also possible to acquire detailed program information, participate in quiz shows, Cookie Set whether to accept...
  • Page 149 ● Broadcast wave ● About 1Seg antenna 1Seg is one of broadcast services, and • To view 1Seg, fully extend the 1Seg antenna. receives radio waves (broadcast waves) that If you give too much force when the antenna are different from FOMA/Xi service. Therefore, is not fully extended, it may be damaged.
  • Page 150 Note • 1Seg audio cannot be output by Bluetooth devices that are not compatible with SCMS-T. • 1Seg is not compatible with the following functions due to copyright protection - Extracting video by connecting HDMI cable - Screenshot - QMemo ●...
  • Page 151 1Seg Viewing How to use the 1SEG viewing screen From the Home screen, "Application" u "TV" • The 1Seg viewing screen appears. • When launching for the first time, you need to select your viewing area. • The gesture guide is displayed after startup.
  • Page 152 QSlide button Tapping this button displays the QSlide guide. It lets you do another task while watching 1Seg. Tapping will take you back to the 1Seg viewing screen. Sliding will adjust the transparency of the 1Seg viewing screen. Tapping will terminate 1Seg. Programs/Channels button Tapping "Programs"...
  • Page 153 TV broadcast area Viewing the data broadcast screen Swipe up/down to switch channels. Tapping "TV broadcast area" on the vertical Tap to display the 1Seg viewing screen. 1Seg viewing screen displays the data Scroll bar broadcast screen. Swipe or drag up to display the data broadcast in full screen mode.
  • Page 154 Using Num. input Using the Program Schedule Num. input is available for some of the data You can view a TV guide of both terrestrial TV broadcast. Tap "Num." to display Num. pop-up programs and BS digital broadcast programs. menu. You can search programs using key words or •...

  • Page 155: Viewing Reservations

    Viewing Reservations Note • The start of a program cannot be notified If you make a reservation for a program, an if this terminal power is OFF at the alarm is notified before the program begins. reservation time. From the 1Seg viewing screen, •...

  • Page 156: Using Tv Link

    Confirming or editing reservation Using TV Link contents Some data broadcasts may show link From the "Reservation list" screen, information (TV link) to related sites. By registering a TV link, it is possible to connect tap a viewing reservation to related sites later. •...
  • Page 157 1Seg Settings Switching the viewing area From the 1Seg viewing screen, From the 1Seg viewing screen, u "Change area" u "TV Settings" • The "TV Settings" menu appears. Change the settings if required Select the area The viewing area changes. Brightness Adjust the screen brightness.
  • Page 158 Please be considerate of the privacy of Camera individuals around you when shooting and sending photos using camera-equipped This terminal has a built-in camera that can mobile phones. shoot photos and videos. Before Shooting All photos and videos shot on your terminal are saved to the internal storage or a microSD card.
  • Page 159 • Shooting a fast moving object may result in Notes for capturing images an image slightly distorted from the image • The Camera employs high precision displayed on the screen at the time of technology, but some pixels or lines may shooting, or the image may be blurred.
  • Page 160 Time catch shot mode Shooting a Photo Switch to mode that starts to shoot several photos one second before pressing the You can shoot photos with both horizontal and shutter button. vertical screen. Scene mode Viewing shooting screen Set the scene mode (Normal/HDR/ Panorama/Continuous shooting).
  • Page 161 Shutter Note Thumbnail • Menus are displayed on the preview Tap to display the preview screen and screen after shooting a photo in case the confirm the shot photo. Also you can edit Auto review is not disabled. The following the photos.
  • Page 162 Switching cameras Shooting Videos Switch between the front and main cameras. You can shoot videos by switching modes. Switching image quality Videos are shot horizontally. Switch the shooting resolution. Live effect Viewing shooting screen Set visual effects used during shooting. The meanings of marks (icons and others) on Switching the emission light the video shooting screen are as follows:...

  • Page 163: Shooting Videos

    Shooting videos Note on the photo shooting screen • Menus are displayed on the preview screen after shooting a video in case the • The screen switches to the video Auto review is not disabled. The following shooting screen. operations are available. •...

  • Page 164: Viewing Photos And Videos

    Gallery Note • The following operations are available on You can display photos or play back videos the photos/videos screen. stored in the terminal that have been obtained ：Launch camera to shoot photos or by shooting with the camera or downloading videos.
  • Page 165 Synchronizing Picasa Album - "Slideshow": Display the photos and videos saved in terminal in slide show order. You can synchronize Picasa album saved on - "Details": Confirm the details of the shot Google account with Gallery of this terminal. photo. From the Home screen, "Application"...
  • Page 166 Media Player Note • When "Sync Picasa Web Albums" has a The "Media Player" application plays music files check mark, Gallery of this terminal is and video files saved in the internal storage synchronized on Picasa album of Google or a microSD card. Media Player supports the account.
  • Page 167 Copying Music Files and Opening the Media Player Videos to this terminal From the Home screen, "Application" From Media Player, you can play music files u "Media Player" and video files of your own after copying them • The "Media Player" screen appears. to the internal storage or a microSD card.
  • Page 168 Media Player. songs included on the album. • For details about MUSIC store, VIDEO • Movie: Display a list of playable videos store, refer to the DOCOMO website. saved on the internal storage and the microSD card. Application...
  • Page 169 Play progress bar Playing Music Drag to play a song from a desired point within the song. In the song list, tap a song you want Cover flow to play Tap to switch between display/not display • The Music screen appears and the song elapsed time, play progress bar, and song is played.

  • Page 170: Playing Videos

    Volume bar Playing Videos Adjust the volume by dragging it. From the "Media Player" screen, tap Note • While a song is playing, is displayed in • A list of playable videos saved on the the status bar. internal storage and the microSD card •...
  • Page 171 Elapsed time Note Play progress bar • Pinch-in/pinch-out this terminal while Drag to play a video from a desired point playing back a video from the "Videos" within the video. application to enlarge/shrink the screen. Video information • Tilt this terminal to the side while displaying Displays titles/artist names.

  • Page 172: Using Playlists

    Using Playlists Displaying playlists From the "Media Player" screen, Playlists allow you to play your favorite songs in a desired order. "Play list" • Current playlists are displayed. Set to view playlists • The following quick playlists are available. With the initial setting, the bottom bar of the Recently Display songs that were "Media Player"...
  • Page 173 Creating a playlist Editing playlists In the Playlists, "Create new" In the list of Playlists, tap the playlist that you want to edit Enter the playlist name u "OK" • The songs contained in the playlist are "Add songs to playlist" displayed.
  • Page 174 Deleting/sorting a playlist Setting the Media Player In the Playlists, "Edit" From the "Media Player" screen, • Tap "Delete all playlists" to delete all u "Settings" playlists. • The "Settings" menu appears. • Tap on a playlist to make turn red and Change the settings if required become a deletion target.
  • Page 175 "Age", you can display In Using GPS lists according to Playlists/Genre/Age • NTT DOCOMO is not liable for any damage on the "Media Player" caused by failure of GPS system etc. screen. • It cannot be used as navigation devices for •...
  • Page 176 • Please check the websites of the GPS • Wireless communication products (mobile service provider and DOCOMO for news phone or data detector etc.) may intercept regarding the usage of positioning provisions satellite signal and signal reception may not and current locations notifications.
  • Page 177 Setting Location Services Note • It may take up to ten minutes to You need to activate GPS function beforehand determine current locations when the to use the services that needs location GPS functions are used for the first time. information.
  • Page 178 Using Map Search for Route on Map You can view a detailed route to your destination. Opening Map From the Home screen, "Application" u "Maps" You can display present location, search another place, or search route by using Google map. Enter your departure point in "Start •...

  • Page 179: Using Latitude

    Using Latitude Using Navigation Google Latitude enables you and your friends Google Maps Navigation (beta) is route to check each other's locations on maps and guidance software with voice guidance. share status messages with each other. It also From the Home screen, "Application" enables you to send emails, make calls and u "Navigation"...

  • Page 180: Using Local

    • "STARRED": Search a place with star on Alarm / Clock Google Map. From the Home screen, "Application" Note u "Alarm/Clock" • Any operation during driving should be Select either "Dismiss" or "Turn on" when performed by a passenger. the "Gesture guide" screen appears. Using Local Setting Alarm You can use Local to easily search for near by...
  • Page 181 Alarm Set the alarm sound. Note sound • The alarm functions at the time set for Alarm Set the alarm volume. the alarm. Tap "Stop" to stop the alarm. volume Tap "Snooze" to make the alarm function again according to the time interval set Application From "None", "Calendar"...
  • Page 182 Setting the Timer Setting the World Clock You can confirm the date and time for "Timer" on the Alarm Clock screen registered cities in a list. • The Timer screen is displayed, and the "World clock" on the Alarm Clock following settings are available.

  • Page 183: Switching Calendar Display

    Switching Calendar Display Calendar This terminal has a calendar for managing your Tap "Day"/ "Week"/ "Agenda" in the schedule. You can synchronize with scheduler change display box constructed by Microsoft Exchange Server or • Swipe left or right in Day or Week view to Google calendar if you have Google account.

  • Page 184: Changing Calendar Settings

    Changing/Deleting Schedule Calculator Tap "Agenda" of switching display From the Home screen, "Application" box on the Calendar screen u "Calculator" • Drag or swipe to right and left the Tap the schedule to change/delete part where key is displayed to switch (edit)/ (delete) "Advanced panel"...
  • Page 185 SmartWorld Polaris Office You can use Polaris Office to read or edit Word, From the Home screen, "Application" Excel, PowerPoint files saved on this terminal u "SmartWorld" or microSD card (as of October 2012). • Tap "Start LG SmartWorld" when you From the Home screen, "Application"...

  • Page 186: Backing Up To Sd Card

    Backing up Data and Note Settings • If you have not registered as a user, the user registration screen appears when activating "Polaris Office". Backing up to SD card • Files with password may not be usable. • Files created on PC may be displayed You can backup or move the Phonebook, sp differently or may not be displayed.
  • Page 187 "Select" "OK" Tap "Add"/ "Overwrite" on "Restore Enter the docomo apps password u settings" screen u "Start restore" "OK" "OK" • Tap "Back to top" to go back to the "SD card backup"...
  • Page 188 Copying the contacts on Google Note account to docomo account • Do not remove the battery pack or microSD card during backing up or "Phonebook account copy" on the restoring. The data may get broken. "SD card backup" screen u "Select"...
  • Page 189 From the Home screen, "Phone" u via Bluetooth, Email and Gmail, and back up to a microSD card. You can also load phonebook "Phonebook" data stored in a docomo miniUIM card or u "Others" u "Import/Export" microSD card into this terminal. • A menu appears.
  • Page 190 Importing a phonebook from a miniUIM Backing up SMS Messages to or microSD card a miniUIM From the Home screen, "Phone" u You can copy or move up to 20 messages "Phonebook" (SMS) to the miniUIM. From the Home screen, "Application" u "Others"...
  • Page 191 "New" 7notes with mazec-T • Display the memo creating screen. You can input characters by handwriting. When • You can also display the memo creating you are inputting on the other application, screen by tapping on the " メモ一覧 (list you can input with handwriting by changing of memo)"...
  • Page 192 Save input. Sharing/Backing up Memo Undo or redo the input. Create new memo. You can send the created memo to mail, Select types of character, set details on Twitter, Facebook, or backup by link with mazec. Evernote or Storage. Change input panel. On the memo creating screen, Move cursor position.
  • Page 193 Change setting for font size, margin, Marking on memo line feed, ruled line, background as On the memo creating screen, necessary " メモ情報 (Memo information)" " システムに記憶 (Memorize in • The " メモ情報の編集 (Edit memo system)" information)" screen is displayed. •...
  • Page 194 Tap " 日時 (Date and time)" and set Notebook the date and time u "OK" You can save preferred image or memo. From the Home screen, "Application" u "Notebook" Note • Select note and create on the "Notebook" • Mark information of memo and alarm screen.

Table of Contents